Tag building cleaning services

Homeowners and businesses alike experience plumbing complications such as pipes bursting as the seasons change. Pipes within external walls or outside of a structure have a strong possibility of freezing in cold temperatures and will sometimes split open as this process is reversed. Plumbing services are necessary in many instances to ensure the problem is alleviated. Location determines how extensive the repair will be in this type of water system situation. A pipe leading to an outside faucet with easy access will entail small steps and be less work than one hidden between the exterior walls or ceilings of a building. Having a plumbing services professional evaluate the situation is one of the best ways to determine how to fix the problem.

Leave Extensive Repairs to Plumbing Services

Plumbing services are not merely limited to a leaking sink or toilet; they also include the following tasks for a home or business:

• Appliance and Piping Installations
• Inspections
• Leak Detection or Protection
• Thawing Assistance
• Removal of Tree Roots
• Draining Repairs
• General Plumbing Practices
• Code Compliance

Numerous jobs can be performed by a plumbing service to protect a structure, conserve water or energy, and alleviate complications experienced by owners. A burst pipe averages about fifty pounds of pressure, consequently causing water to spray out with force when a problem is present. They are fairly easy to detect when following the trail of water produced. Typical home piping consists of copper soldered to varying types of fittings. Galvanized iron is another material found in older structures, but it has been left behind in new homes due to experienced mineral deposit clogging.

An immense stain on a ceiling indicates a leak; however, investigation is often needed because water can make its way from another area and down the framing points of a structure. Locating the leak is the first step toward repair, and shutting off the water supply to this area is recommended until the issue can be resolved. The damaged section must be replaced to have a permanent fix; however, an owner can perform a couple of protective steps as a temporary resolution until the task can be completed. A repair clamp with a rubber sleeve can be applied to the area to prevent additional leaking.

Plumbing services are recommended when the tools or experience is not available for cutting and replacing the burst section. Actions can be taken before cold weather sets in to further avoid this problem. Begin by identifying the pipes with the possibility of freezing throughout the structure and then cover them with specifically designed insulation. Electric heating tape can also be applied in areas where freezing is common. Take actions to keep water running through these areas of a water system on days when it is particularly cold. Piping should be drained in any building used on a seasonal basis. In the event of a burst, it is best to remedy the situation temporarily and then call a professional plumbing service to make the repair.

Source by Brian Figlioli

The Sligh grandfather clock is popularly bought. It is a product made by Sligh Company, which was founded by a man called Charles R. Sligh. During those days Mr Sligh was building furniture in a small scale Grand Rapids factory. His company had some workers and its motto was ensuring high quality and excellent craftsmanship. After a few years, the company had grown and expanded to a level of global recognition. It became well known for its sligh grandfather clocks. The company has been running for four generations and it still maintains unrivaled craftsmanship.

Normally, people buy this grandfather clock for two reasons. First they buy it to know the time through out the day or night. Secondly, they buy the Sligh clock for purposes of home decoration and interior design. These clocks are hot and elegant. You are much more likely to appreciate how the clock transforms your home. However, you must take care of it properly and often. There is no expert knowledge required to safe your clock from wear and tear. In fact oiling is what the clock requires the most to facilitate the gear movement. Here are four tips to guide you on how to oil your watch:

* Buy the oil kit from the nearest clock store. Ensure that it has tools to use during application and of course the oil.

* Remove the dial to access the front plate. Then spread oil to every gear intersection and joints.

* Check the outer side of the plate. The Sligh clock has a tiny groove, which is normally called an oil sink. Put oil inside this groove to about half way.

* Moving bottom up, apply oil on all of the gear trains. You should use your clock’s instruction booklet if you do not know the areas that need oiling. Different Sligh clocks require unique oiling.

History is something shoppers do not ignore. Even if the latest Sligh clocks exist, some people still insist on buying the classic styles. These are many and they have different features. Some of the common features you are likely to discover on older versions are:

* Many clocks have stainless steel or bronze metal parts including the pivots. This is to ensure durability and elegance. These metals are not corrosive too.

* Decorative and colorful moon discs and dials. These are mainly made of brass.

* Many have lower and upper front hinged doors and other hinged doors at the side to access the movement easily.

* Many clocks have side panels made of glass.

* The clock’s pendulums are decorated at the middle and suspended by a twisted rod that looks like an ancient brass lyre.

* Most of the clocks are made of natural wood with different color schemes.

* These older version Sligh clocks feature Westminster, Whittington or St. Michael’s option chime movements. Some clocks have all the three at once.

* The clock sizes vary therefore you are likely to find your favorite.

There is a great Sligh grandfather clock for you in the market today. Your only role is to search for it seriously especially on the Internet.

Source by G. Smitty

RV is the image of development to maintain your business so dependable. As a closest companion camper roof is the most important part of e took care. It is the point where you may lose all your security and keep your journey safest too. Materials for making RV roofs include different variety. But it is fact that; most important is roofing material to protect it from outer side effects. For a camper roof, you must know the material that makes your camper roof, it makes easier for you to determine the kind of maintenance required.

Specifically frequency and the type of RV roof products you need to make the roof strong and sturdy. Get the maximum benefits with the right maintenance. As a highly reflective rooftop covering to pull down loft temperatures, make the house more comfortable and cooling costs. Camper Roof Repair is a sufficient alternative to be used.

When it comes to mobile home roofing, there are several roofing options but you need reliable one Camper Roof Repair has emerged as viable options. Roofing Replacement Options for Mobile Homes when Fleece as a building material, however, a little bit of a structure, is a direct solution to every last one of these undeniably major issues Roof Coatings establishment can influence you to stay away from all material issues. Roof top repair is undesirable for the majority, yet it can be fun Camper Roof Repair has made it so natural to keep up rooftop and dries rapidly.

You may get advantages of, Camper Roof Repair and stay away from rooftop issues for a longer time of ten years outwardly everything looks new and polished. It influences your rooftop to issue free and shiny outside. Get protected roof from crack and damages rooftop. People prefer too expensive RV roofs and after that weep for their repairing yet it rests forever Roof Coatings can be your closest companions. It’s especially instructive repair with this so you could bear on your pocket easily. It is extremely durable in all temperature and weather extremes. Its awesome look and results ask your love to peruse the voyage and getting more business.

• Clean up how to fix a leaking camper roof.
• Get on top of the camper.
• Start cleaning its roof as thorough as possible.
• Prepare for the upcoming works.
• Make the surface neat and dry.
• Spread it on the dry cleaned surface with brush or roller.
• Let it be dry now for more than two days.
• After you get it dry check it for leaks again.

Camper Repair, the purpose behind choosing it is its waterproof property. It sustains for over ten years. The most essential piece of the assurance is warranty and guarantee certificate. It is decent choices and extremely accommodating by RV roofers.

Source by Nicole Morgon

Swimming as a sport is gaining momentum and so are the notion of having a pool. The ones who love being in water or called water babies can spend hours sitting in the swimming pool. Any structure which can hold water for enabling swimming and other activities related to water.

The pools are of varied styles and it will be interesting to have a view of them. They can be for indoor or outdoor purposes and are not restricted to any particular form. Some of them are cited below:

Types of Pools

• Private – These are smaller in size from the public pools and are generally above the ground, in gardens or backyards.

• Kids – Pools that can be bloated as per the requirement and are transportable

• These are not intended for swimming, however, to enjoy being in the water.

• For Public use – They are massive ones than compared to others and can be accessed by anybody, can be found in any place of public interest. It could vary from one to more in number, can be indoor as well as outdoor.

• Special – Intended for having competitions and races and are usually heated and indoor so that they can be used throughout the year with proper lighting and temperature facilities

• Designed for other purposes- There are ones designed for remedial and therapeutic purposes.

Importance of Pools

• It is a splendid option for a group to mingle and at the same time stay fit.

• Working out in pools offer great strength and convenience to the body.

• It is used extensively to teach scuba diving and other water sports.

• It adds extra beauty and charm to the location.

• Having a pool greatly enhances the value of the property.

Limitation of Pools

• Timely maintenance is a must for the pools or else they can prove hazardous to health.

• If not cleaned well can lead to a lot of diseases, it is important to keep checking the ph. levels and effective use of the chemical in order to avoid bacteria getting in the pool.

• It is miles need for a pool to have suitable protection standards and beneficial lifeguards in place else there are high chances of drowning which could be even dangerous to one’s life.

Undoubtedly, the Swimming pools are a great sight for any location and make it look a class apart, increases the value of the property but at the same time, it is important to be cautious about its sanitation and other safety measures so that one can enjoy and be fit but not at the cost of one’s life.

Source by Achal Mehrotra

A plumber is a very important person who plays a very crucial role in the smooth running of a home or business premises. The supply of clean water and the proper disposal of waste from a building is the responsibility of the plumber.

Users of a building require water every so often and will therefore use water appliances like sinks, toilets and water fountains. The waste then has to be disposed through the sewage system. The water supply and disposal systems require installation, repairing and maintenance and this is ably done by a plumber. There are a variety of services that can be provided by a plumber.

Drain Cleaning

Blocked drains are a very common plumbing problem and they occur due to a variety of reasons. Foreign objects can get into the drainage due to children flushing large objects like toys down the toilet. Leaves are also a common cause of blocked drains when they accumulate in the drainage pipes.

Hair, grease and fatty substances can also block drains and the services of a plumber will be required. There are different methods used to clean drains including the use of the hydrojeter and drain snake. To identify the location of blockage in a pipe, a plumber can make use of drain cameras which are lowered into the pipes. The plumber can then view the condition of the pipes from a monitor and apply the required method to clean the drains.

Pipe Relining

Pipes have to be repaired from time to time as they can have cracks in them. Cracks can be created by roots of trees which access the pipes in order to get to the water. Pipes can also get misaligned due to the shifting of the ground. These pipes would need to be repaired or replaced and pipe relining is an efficient method of repairing pipes. The method does not require the digging up of trenches to access the pipes.

Rather, the plumber inserts a liner into the pipes that is made of a strong material such as epoxy. The pipes that are repaired using this method are safe from infestation from tree roots since there are no joints. The repair work only takes a few hours whereas normal repair of pipes can take several days which can be very inconveniencing.

Gas Fitting

There are plumbers that are skilled in gas fitting which involves the installation, repair, modification and servicing of equipment which supply or use gas. Gas systems require a licensed gas fitter to work on them since gas can be hazardous.

A gas leak can cause explosions while liquid gas that burns inefficiently can produce carbon monoxide. Properly installed gas produces carbon dioxide and vapor which are both harmless. Carbon monoxide on the other hand causes health complications when inhaled for a prolonged time.

A gas fitter installs appliances such as burners, regulators, valves and gas meters. There are different types of gas appliances which vary in how complex they are and in the level of pressure that is needed in order to operate the appliances. A plumber that is trained in gas fitting should be able to identify where the gas equipment should be installed. He should also test the pipes that are to hold the gas.

Source by James Hasapis

Housekeeping is one of the departments in the hotel that has the most bulk expenses and consumable items. Items like bathroom amenities such as shampoo, conditioner, body lotion or moisturizer, eau de cologne, facial soap and body soap; bath towel, hand towel, face towel, bath mat, bathrobe, rubber mat; bed sheet, pillow, pillow case, throw pillow, neck pillow, mattress pad, blanket, duvet/ duvet insert, bed cover; toilet paper, facial tissue; coffee maker, coffee sachet, sugar condiments; ironing board, flat iron; alarm clock; cooking utensils, crockery’s and cutlery; give away toothbrush and toothpaste; printing materials, stationery, envelope, note pad, ball pen, folder, telephone directory, Bible or Holy Qur’an can have a substantial impact in the hotel’s overall expenses.

These are variable assets that when consumed, damaged, lost or become sub-standard are being discarded or removed from circulation, Once removed from circulation or consumed, the same quantities must be replenished or replaced with additional mark-up in order to maintain the high standard or quality of service in the hotel.

Fixed assets like the room’s furniture and fixtures such as beds, fridges, television sets, mirrors, sofas, easy chairs, reclining chairs, tables, telephones, lamps, headboards, air-conditioning/heating equipment etc. can be very costly when damaged or become sub-standard. These items are usually included in the Capital Expenditure Budget especially when refurbishment is required. But if its only one or two pieces, this amount can be allocated in the operating budget.

For the machine and equipment, Housekeeper’s cart and vacuum cleaners are the most important tool used in the overall cleaning and maintenance of the hotel guestrooms and public areas. Machines like carpet shampoo and water extraction machine, rotary machine for carpet shampoo, floor scrubber and floor polishing, wet and dry vacuum cleaner. hydraulic lift etc. are additional heavy duty machines that help in the overall cleaning requirements of the hotel. These too are included in the Capital Expenditure Budget.

For Laundry area there will be the laundry machine, washer, dryer, dry cleaning machine, laundry folding machine/ calendar, tables, carts, laundry sorter boxes, movable clothes hanger rails, guest laundry printer etc. are Capital Expenditure items, while detergent, bleach, stain remover, dry cleaning fluid, ph level water treatment solution etc. goes to the operational budget.

Listing all the detailed items involved in preparation of budget gives you an idea how intricate housekeeping budget preparation is.quote>

With the above numerous items, the consumable or fast moving items are the most important items in the preparation of budget. The consumable items are included in the operational budget. The fixed asset items are included in the Capital Expenditure Budget or CAPEX.

Operational Budget is being prepared annually and submitted to the Director of Finance for further study and to finalize the total amount in coordination with the department head. Operational Budget is always based on the next year’s forecasted occupancy percentage. For example:

Item: toilet roll @ $0.50/roll
2008 consumption @ 50% occupancy = 50,000 @ $0.50 =$25,000.00
2009 forecasted occupancy percentage is 75%

75%- 50% = 25% ( 25% of 50,000 =12,500)

(50% + 25%= 75%) = ( $25,000.00 +$12,500.00 = @37,500.00)

Remaining items are calculated in the same manner till all the items required are included in the next year’s budget.

Capital Expenditure Budget is for specific items or project that needs to be replaced, made and built in the improvement of guest service or the hotel itself. For example:

The hotel management with the approval of the owner of the hotel would like to extend the Laundry service to non-hotel guest or outside customer. The project will be a “Laundry Shop”, therefore a quotation will be required from the contractor for the cost of building the Laundry Shop, the additional guest/customer laundry bag, laundry and dry cleaning list, and additional manpower for customer service etc. To sum up the amount of Construction of laundry shop = $35,000.00; additional laundry bags and lists = $5,000.00 and additional manpower = $9,000.00 annually.

The $35,000.00 will be included in the Capital Expenditure while the additional laundry bags/lists and manpower will be added in the operational and staffing budget.

Therefore, the operational budget is for the consumable items and Capital Expenditure is for special project or items that are costly. There are also certain items being shared by the Front Office and Housekeeping. The charges on these items are being split between the two departments. When it comes to Maintenance, Engineering Department charges the Housekeeping for any services rendered like maintenance of the machine wherein they have to supply machine parts and labor, so these are being coordinated with Engineering. It is important that housekeeping machines are handled with care to avoid such charges.

Monitoring the Operational budget is the most crucial part in the operation of business. With the modern technology and the computer software, daily updated total expenses against budgeted amount are made possible and easy to trace in order not to exceed the budgeted amount. Every end of the month, the Accounting Department distributes copies of last month’s budget outcome to the General Manager and the Department Heads in order for them to review and analyze where their budget is in line and where it is not. General Manager will require the department head that have exceeded their budget a reasonable report since he is accountable to the corporation as well as the owner of the hotel.

Source by Natividad Imm

Drum-Kickers, Soap Salesmen…they have been called many things. Water Treatment specialists (probably the name they prefer) are everywhere. As a mechanical contractor, we have had many knock on our door. With most large commercial buildings and industrial facilities in Memphis utilizing water cooling/heating mechanical equipment, this industry is highly competitive, but is water treatment really necessary? In this edition of Mechanical Matters® I am going to answer that very question and discuss several other important facts about water treatment services.

In this edition I want to answer three questions regarding water treatment:

Exactly what is water treatment and is it necessary?

How does improper water treatment service effect mechanical equipment?

Are there energy savings with water treatment?

1. Exactly what is water treatment and is it necessary?

Water treatment describes a process used to make water more acceptable for a desired end-use. These can include use as drinking water, industrial processes, medical and many other uses.

The goal of all water treatment process is to remove existing components in the water, improving it for subsequent utilization. (Wikipedia.org)

In the mechanical industry water treatment is a method used to optimize most water-based mechanical and industrial processes, such as: heating, cooling, processing, cleaning, and rinsing, so that operating costs and risks are reduced.

Most water treatment programs include water softeners, inhibitors and other chemicals needed to ‘treat’ the water in order to reach the desired conditions for mechanical use and heat transfer. Products used to maintain proper water conditions are often fed automatically by sophisticated equipment directly into a chiller or boiler’s water. Water is used for both cooling and heating in large commercial building applications. In most industrial environments water is used for cooling production equipment or an ingredient to making a product. How the water is used will determine what type of treatment is necessary.

Most water treatment companies use test kits and chemical dispensing systems which have made the use of water treatment chemicals in chiller, boiler and cooling-tower systems much easier. But attention to details, such as how often systems are tested, is critical to system performance. The correct water treatment chemistry at the correct time is extraordinarily important because even minor problems can create major costs.

Last week I sat down to breakfast with Gary Reynolds and Bob Schubert of Garratt Callahan. They are water treatment ‘specialists’. Gary and I have worked together with several mutual customers. Their attention to detail, customer service and vast knowledge of water treatment is why many buildings in the Mid-South are in good hands with Garratt Callahan. In our meeting they provided me with some great information about the importance of water treatment, the effects of poor service and things to look for in choosing a service provider

2. How does poor or no service effect mechanical equipment?

Improper Water Treatment or no treatment at all will increase your energy consumption and operating cost while decreasing your mechanical equipment’s efficiencies and life expectancy. A well designed and implemented water treatment program is highly important to the operation of any steam boiler, centrifugal chiller and cooling tower. All three of the systems shown below utilize water for cooling and heating.

Poor water treatment lets water interact with the surfaces of pipes and vessels which contain it. Steam boilers can scale up or corrode, and these deposits will mean more fuel is needed to heat the same amount of water. Cooling towers can scale up and corrode, but left untreated, the warm, dirty water they can contain will encourage bacteria to grow, and Legionnaires’ Disease can be the fatal consequence. The condenser tubes within a chiller and other water cooling equipment can also scale up and corrode thus preventing good heat transfer. Increased energy consumption and poor cooling performance is common result in inefficient water treatment.

Water treatment can often be categorized as ‘low-tech’ and unglamorous. However, the right chemicals, proper chemical feed equipment, and a dedicated service provider is essential to your mechanical equipment and should be ‘treated’ with top priority.

3. Are there energy savings with water treatment?

Treatment Value: Expert water treatment can cut your water, energy, and maintenance costs substantially. Perhaps most important of all, it can save you the cost of fixing or replacing equipment that’s been damaged by inadequate water treatment – including the downtime and lost revenue usually associated with solving such problems.

The examples of water treatment ROI (Return of Investment) shown below show how very thin layers of deposited material from poorly treated water can drive up energy costs.

Scale

System: 1,000 ton chiller

Operation: 12 hours/day, 365 days/year

Cost of electricity: $0.10/kWh

Scale thickness: 1/32 inch

Elimination of 1/32 inch of scale saved $15,018 per year.

Biological Fouling

System: 1,000 ton chiller

Operation: 12 hours/day, 365 days/year

Cost of electricity: $0.10/kWh

Bio-film thickness: 1/1000 inch

Elimination of 1/1000 inch of bio-film saved $26,834 per year.

“As little as 3/16-inch of scale can cause a boiler system to use 38 percent more fuel. The most minuscule amount of dissolved oxygen in the water also means a system could be headed for corrosion problems. And even a thin layer of bacterial slime in chiller tubes can significantly affect heat-transfer efficiency.”

Wrap Up:

As mechanical contractors we are no strangers to the importance of water treatment. However, after researching and writing this article I can assure you that I am much more informed about the necessity and advantage to having a good water treatment program.

In this edition Mechanical Matters®, I discussed three important facts about chemical water treatment. First we learned the definition of water treatment and its use in the mechanical industry. Second, we learned that water treatment is definitely necessary, and without it your mechanical equipment will suffer. Last we learned how proper water treatment will save energy, and ultimately increase your bottom line.

Source by Jimmy Veteto

One thing I’ve always said as an entrepreneur is; “to hell with the economy, we are here to win in the market, and will find a way,” and perhaps this is why when I was recently asked by an acquaintance who runs a power washing company what he could possibly do as local businesses in his area which is getting hammered by the economy – that I told him not everyone was hurting in the economy, there are always sector rotations, and some businesses are doing better than others. I told him; “it is your job to find out which customers are doing well, and are willing to spend the money to have their facilities cleaned properly, to get even more business.”

For instance, when retail is down, and the shopping malls are not paying power washers to come as frequently, maybe it’s time to look into restaurants. Oh, but you say those are down too, that may be true, but not the fast food restaurant sector. Generally they do better in a down economy, because they are able to sell their products for lower prices and meet the demands of the consumer which doesn’t have as much money in their pockets. Right now there is a drought, and livestock ranchers are having trouble feeding their animals, so they are taking them to slaughter early. This is causing the price of meat to drop drastically, and we will see more of the one dollar menu items.

Therefore, these QSR’s or quick service restaurants that you know as “fast food joints” will be working with a low-cost high-volume strategy. Still, they will need their facilities power washed. Below are some of the price quotes that I can recommend for power washing fast food restaurants;

Trash Area, Drive-Thru, Side Walks:

$275.00 on time, or $225 once per month, or $200 every other week per store.

Pressure Washing and Cleaning a Metal Roof Façade Band Around Building:

$250.00 and realize you have to clean the sidewalks and wipe down the windows afterwards.

Power Washing and Cleaning All Metal Roof of a Fast Food Restaurant:

$1200 and be very careful it gets really slippery, and doing it by ladders is hard work, watch the streaking too. Might need extra extension poles with towels on end to dry it off as you go, very oxidized, bird crap, stains, to do it right you really need to wax it but if you do charge $2500. Check my figures and be very honest with how long you think it will take at $85 per hour, make sure my numbers match up, if not raise price. Once you clean the roof well, offer them monthly clean-off for $600.

The first time is a total hardship, it’s going to be a mess, and you will have to power wash all that reddish, bluish, yellowish, or greenish colored water off the concrete or it will leave stains on sidewalk and parking lot too. Think if that’s going to be an additional challenge based on the site, each site and water drainage is different, then charge more accordingly. Please consider all this and think on it.

Source by Lance Winslow

The word “Green” is not the omni-term for anything environmental although there is the tendency to substitute the word “Green” for “Environmental.” Environmentalism is to grand topic that has several subdivisions. Under this grand topic o environmentalism, we will find Green, Sustainable, Pollution, and Conservation. Each one of these subdivisions are immense subject on their own.

In the mash-up of words and concepts, we have lost the fundamental meaning of Green. Environmental, Green, or Sustainable now blur into that ugly green color that we made in kindergarten when we slurred all the colors into one big blob. We cannot progress when confusion reigns, and every science starts out with a definition of terms.

The best definition of Green refers to the health impact of what we do on living things. So Green is primarily a health-related issue. This is seen in the fact that cleaning products were the early Green issues. In fact, indoor air quality is a big factor in Green buildings. Sick building syndrome was the result of poor indoor air quality, which is the antithesis of Green.

Sustainability is also badly morphed into many applications, but essentially deals with the management of our resources. This is a complimentary issue to Green, so it a Green and Sustainable business means that the company considers the health of the workplace as well as the material demands of the business.

The health of the workplace can be impacted by cleaning products, building materials, furniture, as well as paint and carpeting. “Outgassing” is a well documented concern. The installation of new carpet, new furniture, new paint, and new wood leave residual fumes as these items continue to dry out. Your senses will betray you because we think that anything new is clean and healthy, but that is a huge mistake. The varnishes and additives to paint, carpet glue, and wood fall under the category of Volatile Organic Compounds (VOCs) that are not good for you. If your health is comprised, these fumes can worsen your condition and hasten disease. If you are healthy, the long term exposure will wear you down in time.

Think of the dust that is recirculated that contains bacteria, virus, dust mite feces and scales, carbon from the copies, and so much more. It is a wonder that we aren’t sick all the time except that we are generally healthy and able to live in hostile environments for a long time.

The people who are supposed to help clean our facilities and protect our health through sanitizing processes are the janitors, but clean does not mean healthy. The ammonia in the window spray is harmful, the zinc in the floor finish is bad for humans, the numerous chemicals in the cleansers add to a worsening situation.

Mold is a persistent problem for many buildings. The mold spores are never good for the workers, and can become a crisis concern if untreated. Latent issues remain the in the HVAC system as well. It is fair to say that the air of any building is a kind of “Ground Zero” for any office or business. If the employees are negatively impacted, productivity will fall. Afternoon headache, occasional nausea, and lethargy can be signs of an unhealthy indoor air quality. So, while your building may be energy efficient, and you may be conserving water as well as recycling your trash (sustainability issues), the building may be very un-Green because it is unhealthy.

The Green Business League believes that a Green office starts with an understanding of the healthy office and a serious look at the components that compromise indoor air quality. Consider using a Green certified janitorial service that also uses Green cleaning products, microfiber cloths, and HEPA vacuums. Do not let mold go untreated. Be mindful of all paint, carpet, and furniture used in the facility because they introduce a large volume of gases into the air.

Green is a primarily a health-related issue that blends into the other topics of sustainability, pollution control, and conservation. By dividing out the topics properly, the plan of attack seem much more clear. To attack the issue in a methodic manner, businesses should considering “Going Green” first then moving into the sustainable issues. The early disdain for the word Green comes from the anti-business attitudes of ultra-conservationists that needed a target for their vitriol. Green is not an anti-business concept when properly understood. A Green business is one that is a good place for living things in the workplace, in the community, and in the world.

Source by Michael Richmond

Owning a successful business is no longer reserved for a lucky few. It is because there are some rules followed by those successful business people in making the business people to climb the richness ladder with assurance and comfort ability although any business is about risking and that the higher the risk the higher the reward or profit.

When you want to startup a business you first must have an idea, example of business ideas are like opening up a hairdresser, opens a salon, a shop and much. Generally, people do make huge mistake. Just because they are thinking about the job and not the business. Only because you are a good chef does not mean you know how to run a restaurant. More important, it does not mean a restaurant would be successful in your market. So you have to clearly assess and evaluate your business idea before implementing it.

Business wise you have to make sure that what you are going to produce Is it a product or service they have fallen in love with. Again, just because you love something does not mean a profitable business will come of it. This is especially true for first-time entrepreneurs. Learning how to run a business is hard enough; you don’t need to make it any harder by doing something you love rather than something customers love paying you a good profit for or producing what you want instead of what they want.

There are some guidelines on how you are sure that your intriguing idea is also something from which you can truly make a profit? There are three essential considerations one has to bear in mind.

Make sure the product or service has a repeat buy. This is by far the most important aspect of long-term business success. You have to have a product or service that people will keep buying. It is better and more profitable, in my opinion, to have a pool cleaning company than a pool building company. Put another way, a business owner should focus on getting a customer once, but making a profit from that person for a very long time.

Be certain you have a high profit margin.

There are very few companies that can compete long term on a “we are cheaper” marketing platform. In any new business, you need to watch your cash flow–and if you are trying to work with low profit margins and make gains in volume, you will need to have a high level of working capital to keep you running through the lean profits early on. Having a higher margin is extremely important when you are growing a business so you can self-finance your growth.

Build a strong support team because a good idea is not enough. The idea counts most, yet a quality idea must still have a great team of people behind it to give it wings. Time after time, when people bring me a business investment proposal or an idea they want to take to market, I ask them who is on their team and they respond with something crazy like, “Oh, we have not hired anyone yet.” Get a board of advisers. Get a team of professional accountants, coaches, lawyers and bankers. A great team will greatly improve the chances for success of any business.

Now if I were going into business today, to be sure of the market what would I choose? I would start with one premise and some hot industries. Here the premise is, you do not make money panning for gold, and you make money selling pans. Get in the way of a buying frenzy, and you will be a success. Therefore the fastest way to make a restaurant profitable is not by having a great chef and great decor or big buildings it is by attracting a starving crowd with money so that they can eat the food in exchange for their money.

In other words look for an idea you can take national or, even better, global at some stage. Although it might be fun and a challenge to establish yourself locally right now, but eventually you’ll want to build something much bigger for the future and also expand you business.

Source by Peter Temu