Muhammad Mukarram Technical Services L.L.C
Safety Measures for Dry Ice Blasting

Dry ice blasting is a modern method for industrial cleaning which is done with the help of a dry blaster. The blaster is loaded with particles of dry in a huge quantity which are shot out with force and help to clean any unwanted wreckage or debris on surfaces. In broader terms, dry ice is created by freezing carbon dioxide. Cooler than ice, Its also used in stores to keep soft and hard drinks cold before they are purchased. This method of industrial cleaning can be very dangerous if done without taking any precautionary measures. It is important that you follow all the safety rules before opting for this procedure.

Protective Wear

When dealing with a dry blaster, it is advised that the user cover his hands by wearing protective gloves. Thermal gloves, for instance, provide protection even in low temperatures, so in case you touch the ice accidentally, you will remain safe. Moreover, a face shield must also be used to keep your face from coming in contact with the dry ice while the blasting is being done.

Measures for Electrical Safety

Both the dry ice blaster and other associated equipment must be handled with great care and attention. Before beginning the dry blasting procedure, it is important that you check all the equipment for any loose wires or openings. In addition to this, also check your electrical circuits; avoid using them if they appear to be damaged.a face shield must also be used to keep your face from coming in contact with the dry ice while the blasting is being done.

Blaster Hose Safety

Never work with loose hose fittings. Use a wrench when a fitting needs to be tightened and refrain from using the hose above the recommended pressure. Once the dry blasting is complete, leave the hose alone for a while so that all the air is released and then unplug it from the dry blaster. Do not disconnect the hose during operations.In addition to this, also check your electrical circuits; avoid using them if they appear to be damaged.

Safety During Operations

It is advised that a dry ice blaster should always be used in open spaces. A well ventilated area, for example, is ideal for this procedure since it will keep the risk of accidents to a minimum and will limit the exposure to the ever harmful carbon dioxide. Remember, never to point the blaster at another individual, keep it in the place that needs to be cleaned and carefully unplug all equipment as soon as the process of blasting is complete.

Source by Ashlynn T Morris

Typical HVAC Services Offered by a HVAC Company

HVAC (Heating, ventilation and air conditioning) companies provide a wide range of services for both residential and commercial property owners. These services not only focus on improving the functioning of the equipment but can potentially reduce utility costs as well. The following paragraphs describe some typical HVAC services offered by a HVAC Company.

Cleaning and servicing a furnace

Getting your furnace cleaned and serviced regularly may eliminate potential heating problems during the cold weather. The air filters of a furnace must always be clean so that dirt and dust do not get trapped in the filters thereby blocking the air flow. When the air flow gets obstructed, the furnace tends to work harder, which results in diminishing efficiency and outputs as well as increasing utility bills. A licensed and certified HVAC contractor can check the AFUE (annual fuel engine efficiency) of your furnace and advice you how to handle your heating system as well as how to lower your heating bills.

Air conditioner cleaning and maintenance

An AC that does not cool well but runs may be having a coil leak problem. HVAC professionals can check for such leaks and recharge the system by constantly cycling it so that it doesn’t raise the utility costs. If it is important to replace a cooling system that is not functioning effectively, the professional would suggest a new cooling system with a high SEER (seasonal energy efficiency ratio) rating which would not only keep the environment at a suitable temperature but would also lower your utility costs.

Installing a programmable thermostat.

Turning the heating and cooling unit down when you are away can save you a lot in terms of utility bills. This is where a programmable thermostat comes in handy. These devices can be installed by the HVAC companies so that you can set your HVAC system to turn the cooling or heating down whenever you leave the house or office and then switch them on when you are about to return. Therefore, the house or building would be at a suitable temperature when you are there, but save considerable amount of money while you are away.

Audit the energy used in your home or commercial building

Energy audits are useful in establishing if the equipment is working efficiently and cost effectively. Heat gain, heat loss, proper ventilation and energy efficiency can be evaluated by professional HVAC companies to determine if the equipment can effectively cool and heat your home or building.

Upgrading outdated equipment

When you want to upgrade a non-functioning or outdated HVAC system, the professionals can determine the right equipment for your home or office. In order to cut costs on your utility bills, you should opt for equipment with high efficiency.

Finally, seeking the services and advice of HVAC contractors comes with a lot of advantages. These professionals are trained to assess the needs of your home or building so that they can determine the most energy efficient and cost effective equipment for you. Moreover, regular maintenance of your HVAC systems by experienced professionals would make the equipment to last longer.

Source by John Stackson

The Benefits of Hiring Plumbing Services In Sorento

The Mornington Peninsula that is home to the town of Sorento is more than just stunning beaches and homes to die for. It is also home to fantastic 24/7 plumbing services offered by reputable contractors who specialise in all types of plumbing-related needs.

If you live in the southeast Melbourne area or on the Mornington Peninsula and are unsure what a local plumbing service can do for you, check out the benefits of hiring plumbing services in Sorento.

# 1 – Fast & Efficient Installation of Plumbing Systems

From roofing plumbers who can install a system to get more hot water to the upper floors of your home, put in new rainwater tanks, gutters, or downpipes, to a gas plumber who can install a new flue system or gas hot water unit, plumbers know how to get the job done right.

If you need anything like this put into place, don’t try doing it yourself, as you could end up paying more money if you mess it up and need to get a contractor in.

Trust that plumbing services in Sorento can offer qualified and licensed plumbers with years of experience who can provide quality workmanship at affordable prices!

# 2 – Expert Repair & Maintenance of Plumbing Systems

In Sorento, a qualified plumbing service doesn’t just install a system. They are also experts at maintaining and repairing plumbing systems to keep them working efficiently.

Plumbers can test hot water systems to ensure they are performing to their best abilities, install new taps or toilets if needed, and even perform repairs on gas lines that may need fixing.

With the right plumbing company, you won’t have to do it all yourself to get your plumbing working smoothly again.

# 3 – 24/7 Emergency Plumbing Services In Sorento

Nothing is worse than a plumbing emergency right before you plan on having guests over for a party or an extended stay. Fortunately, plumbing services in Sorento are available 24 hours a day, seven days a week, to help you with your plumbing emergencies.

They can help take care of broken hot water systems, blocked drains, and busted pipes so that you don’t have to worry about it! All you need to do is call them out if the issue occurs, and they will be there as soon as possible to take care of it.

# 4 – Specialised Services

Those looking for a certified plumber to help with specialised services, such as those needed during bathroom and kitchen renovations, can get the right plumbing services in Sorento.

A plumber service can install new appliances, lay down new tiles, and even work with you to find piping that will go well with your decor or style preferences.

The experienced plumbers working for these services are not only conscious about installing features that will last a lifetime, but they will offer honest opinions about what type of piping or appliances that you may need for your new space.

Find a Plumber in Sorento and the Mornington Peninsula

When you need to find a plumber in southeast Melbourne or on the Peninsula, don’t hesitate to contact one of the many reputable plumbing services in Sorento. Not only do they offer affordable pricing, but they also offer fast and efficient installation and repair on all plumbing systems and services.

Source by Edmund Brunetti

7 Factors To Keep In Mind When Searching For A Good Air Purifier

If you are on the lookout for an efficient air purifier, make sure you don’t forget about some essential factors. The two of the most important tones are ACH ratings and HEPA filtration. Given below is the list of some important factors that must be taken into account before you make this purchase. Read on to find out more.

1. Consider the size of your room

If you think you can install just any air purifier regardless of the size of your, you are going to make a big mistake. If you have a big room, make sure you check out different air purifiers, consult the customer service representatives, and then decide on a good unit.

With a small unit, you won’t be able to purify the air inside a large room. Therefore, considering the size of the unit is one of the most essential factors when it comes to purchasing this device.

2. Don’t buy a noisy unit

Will you be able to sleep in your bedroom with a lot of noise generated by an air purifier? Like most people, you won’t be able to sleep well if your air purifier is making a lot of noise throughout the night.

Therefore, you should choose an air purifier that does not produce noise more than 70 DB at full speed.

3. Check for HEPA Filters

What makes HEPA filters so special is their ability to filter at least 99.99% of particles in the air. Apart from this, some of these air purifiers are designed to purify the gases and foul odors. These units contain activated carbon filters in addition to HEPA filters.

4. Check the certification

Some domestic products come with claims that they can help control allergens. However, the reality is that most of these claims are full of exaggeration. If you want to make an informed decision, you should look for the certification of a product. These products pass a number of tests to make sure they can filter out harmful particles in an effective manner.

5. Go for a higher ACH rating

This is an interesting credit rating. It tells you how many times all of the air in your room has been filtered in one hour. So, what you need to do is invest in a unit that comes with a higher ACH rating. The good thing is that these units are known for their higher efficiency.

Therefore, if you want to avoid asthma and allergies, experts suggest that you purchase a unit that comes with a rating of a minimum of 4x. Since these units are much faster, they can purify your indoor air several times in 60 minutes.

6. Avoid units with Ozone Emission

The downside of some of these air purifiers is that they generate ozone continuously while filtering your indoor air. Since ozone is bad for your respiratory system, it is better that you avoid units that generate ozone while operating.

7. Upkeep

Most consumer-grade air purifiers come with a price tag of around $100. However, the price varies on the basis of a number of factors, such as the brand, size, and the type of filters. Apart from this, we suggest that you consider the maintenance factor before making your final call

In short, keeping these factors in mind can help you decide on the right type of air purifier to satisfy your needs.

Source by James Yuan

Got Attic Mold? Free Report Reveals Insider Secrets to Eliminate Mold Permanently

So You’ve Got Mold In Your Attic? Now What? Simple Strategies For Understanding and Correcting Attic Mold

(Note- Mold can be extremely toxic to your health and you may spread it around to other parts of the home where it will stay without proper clean-up, we suggest attic mold remediation ‘ attic mold removal ‘ should only be performed by a trained professional with strong credentials)

Attic mold is extremely common in our Northern climate. Attic mold is generally directly attributable to 3 basic causes:

1. Lack of adequate ventilation or improper ventilation.

2. Existing or past roof or flashing leaks.

3. Ice damming as a result of inadequate insulation and failure to incorporate “Ice Guard” along the eves.

4. Improperly exhausted bathroom fans and or dryer vents.

We will briefly discuss each problem and the appropriate remedy as well as covering the basic abatement strategies offered by “so-called” professionals and why our ‘recommended’ process makes more sense.

By far the most common cause of all attic mold is improper ventilation. Let’s start by explaining that in most attics the mold does NOT grow in the summertime. This is because during the spring summer and early fall months the daytime temperature of the attic is far to warm for the mold to effectively grow and the humidity levels inside the attic are typically too low to allow for mold growth. Most mold will only grow between 40 and 90 degrees Fahrenheit. Some molds that belong to a special class of mold (the ones usually affecting northern climate attics) called the Chrysophile molds will grow in temperatures as low as the 20’s.

HOW THE MOLD GROWS

During the winter months when we heat our homes, some of the heat is inevitably lost into the un-heated attic space. This hot air mass then moves upward where it will dissipate outside if the attic is properly vented. If however the attic is poorly vented the hot trapped air will encounter the cold surface of the underside of the roofing boards or sheathing. This hot -air- meets- cold-surface results in dew-point being achieved. This dew-point created condensation and is often more noticeable on the nails as the nails are more efficient at conducting the cold temperature from outside. The condensation then forms water droplets which can drip onto the floor of the attic or worse sometimes run down into the wall cavities below resulting in potentially “hidden ” mold which can be the source of frustrating to diagnose health problems.

Often a roof will have sufficient roof ventilation but the soffits (eves) are not vented. Even more common when a house receives new siding the siding contractor will install vented soffit panels giving the eves the appearance of being vented when in reality they are not, as no holes were ever cut into the plywood covering the bottom of the eves. Sometimes the attic is ventilated properly but an overzealous attempt to insulate has blocked the air flow from the soffits to the ridge preventing proper ventilation. An easy way to check whether or not the vents are there or are functioning properly is to go up into the attic on a sunny day, extinguish all lights and look for daylight coming in along the edges. A well ventilated attic should allow visible daylight in along the edges.

What is the best way to vent the roof?

Roof ventilation is divided into two categories: Incoming air and Outgoing air.

Incoming Air: The most effective way for air to enter the roof is through vents that are placed in the soffits along the eves. Continuous strip vents provide the most reliable ports as well as rectangular vents. Round ventilator plugs are easy to install but are usually to small to provide adequate air flow.

Outgoing air: Stale or heated air escapes through the top of the roof. There are many ways to achieve sufficient ventilation including: Ridge Vents, Turbines or Powered Vents, Box Vents and Gable End Vents. Continuous ridge vents are the preferred method for eliminating built up hot air but may not be sufficient to ventilate short ridged roofs like hip roofs.

Ventilating heated attics or cathedral ceilings properly is often neglected during initial construction. This often results in ceiling drywall growing mold on the back side when the builder fails to vent and baffle the area behind the ceiling insulation and drywall.

Roof leaks always need to be addressed by a professional roofer and special attention needs to be paid to flashings around chimneys and indeed any penetration found in the roof decking. Flashings often require maintenance between roof shingling jobs and are extremely important to maintain. Roof leak can often develop into festering mold problems both in the attic cavity or WORSE inside of hidden wall cavities in the home.

Ice Damming occurs along the eves immediately above the plate-line of the exterior walls. Leakage in this area easily penetrates into wall cavities where it can become trapped between exterior finish materials and interior vapor barriers. A surprisingly small amount of water can raise the relative humidity of a wall cavity to damaging levels. Mold growth may eventually become visible along the wall base as it penetrates from exterior to interior wall surfaces. More critically spore and VOCs (Volitile Organic Compounds) released by mold can aggravate serious health problems in the houses occupants. Especially at risk are the very young and the old as well as Allergy -sensitive or immuno-compromised adults. In some mild cases ventilation corrections are enough to cure the problem in severe cases the roof shingles must be removed and strips of “Ice – Guard” be installed along the eves to prevent damming. In severe cases the exterior wall drywall must be removed and the wall cavities treated as well.

Improperly vented bathroom fans: Bathroom fans and dryer vents can generate a lot of moisture. They should always be vented directly up and out through the roof. Often times builders or do it your selfer’s will discharge fans or dryer discharges directly into the attic, greatly increasing the overall humidity. Do-it-your selfer’s often try to connect more than one fan into a discharge and will commonly run the discharge out to the eves or soffits rather than straight up and out through the roof. The remedy is simple one fan one roof vent directly vertically up through the roof overhead. On the outside the vent has a hat and is not a risk for water leaks

HOW DO I TREAT THE MOLD?

Unfortunately there are as many “treatments” for mold as there are remediators out in the real world offering “mold remediation”. Attic mold problems are especially challenging for a homeowner to solve as the mold industry has no National Guides so the list of options is confusing and often indecipherable with the average “mold guy” promising the latest craze. Mold spores can grow at alarming rates. One mold spore can develop into 12 million in twelve hours! Also the mold is feeding on the boards, and what you can see with the naked eye are millions and millions of them clumped together. What you can’t see are the “roots” The organism itself. The roots of mold grow into the substrate at least 3/16 of an inch. What we think of as the mold the clumped spores are actually the fruit or reproductive body like an apple to an apple tree. You cannot hope to solve a mold problem leaving these roots and treating only the surface of the wood. Also the majority of the chemicals being used on the market today contain known cancer causing chemicals and worse do not work on porous surfaces (every surface in an attic). The mold certifying authorities recommend putting the attic under negative pressure. This means using expensive equipment to suck more air into the attic than escapes from it. The next recommendation is to remove the insulation into plastic bagged which are taped shut. Then to HEPA vacuum the attic boards trusses and ceiling. Next manually wash all of the same areas with a detergent solution. Finally to correct the ventilation issues.

The Problem: This is an extremely man hour intensive process that costs a ton of money. it also does nothing to address the spores (mold seeds) or to address the roots ( the organism itself). Additionally when you correct the ventilation you bring new spore into the attic every single day. The other contractors in the area use a variety of techniques that can be broken into three main groups: the fog and Encapsulators (spray and spray painters) the bleach and ozonators and the franchise users.

First group- the fog and encapsulators: by far the most common these contractors will tell you that all that is necessary is to go into the attic and fog a “magic” chemical and then to encapsulate the mold using a poisoned mold inhibiting paint. Many of these charlatans will not even admit that their encapsulant is a paint. Usually the paint has a heavy metal added to it like copper or tin or zinc. Sometimes they have a toxic chemical added to them to discourage mold growth.

The problem: These contractors almost exclusively use fungicides that are not sporicidal. This means that they do not kill spores and most of them will not penetrate a porous substrate (like wood). This means that when they apply the encapsulant they are applying it directly over the moldy roots. This is a huge no -no as the vapor barrier forming nature of latex paints can cause dew-point to be achieved between the paint and the wood itself. Have you ever seen what happens when you lay a piece of plastic sheeting or drop-cloth on the ground overnight in the summertime? Did you ever notice those beads of water or dew? That’s because the Earths temperature in the summertime is cooler than the outdoor air. Precisely what happens when you treat an mold attic with any kind of paint. The paint begins to de-laminate and I have seen mold growing directly on Mold-proof paint! We have had to re-treat over 40 of these attic mold jobs in the last year alone!

The bleach and ozonators: these contractors will go into the attic and spray bleach onto the wood. The reason is to remove the stains, many of these companies will not admit they are using bleach! Just ask them what the active ingredient is in their “stain remover” if it is sodium hypochlorite ” its bleach. These contractors usually refuse to warranty their work and they will claim that the Ozone cannons they use will turn the spores into ash.

The problem: Bleach has an ion structure that prevents it from penetrating into a porous substrate like wood, this means it leaves the roots un-harmed. It also releases a powerful environmental toxin called Dioxin. While the ozone cannons will destroy the chemicals off gassed by the bleach this technique leave the complete root structure intact and guarantees that if you ever have a new water leak the mold will go right into full production and the mold problem will immediately return.

The Franchisors: These contractors have bought into a “system” most often using toxic chemicals which can harm you and your family.

The problem: Often their warranties aren’t worth the paper they are printed on as they only agree to replace the chemicals if they fail. Usually the fine print in the warranty makes it worthless. Often these are money seekers who use low dollar labor as the owners bought into the franchise so they didn’t have to work on the job (just like subway shops) I discovered to my surprise about 6 years ago that the chemicals that were being used by my so-called competitors (and indeed by most of the industry) not only DIDN’T WORK on porous surfaces… which is about EVERY surface that mold would grow on in a house. I also figured out that most of these chemicals contain NO ingredients that KILL the spores (the most important but hardest things to kill) and also …that they leave behind RESIDUAL TOXIC CHEMICAL POISONS that in some case are WORSE than the poisons the MOLD makes!

Yikes! I found this out the hard way, cause in the beginning, believe it or not, I used the same old chemicals that everyone else in the industry STILL USES! And you know how I found out? I had three “special Ladies” that got sick from the chemicals I used in their homes. I call these ladies “special” because due to living with extremely TOXIC mold, they developed a RARE condition called Multiple Chemical Sensitivity Disorder. Ever heard of it ? I hadn’t. I can honestly say that I thought they were trying to get money back for a job WELL DONE. But…

Since I had three of them in a row, I decided to try and see if there might be anything to their claim of sickness. I discovered that their noses worked actually much BETTER than a “regular” persons nose (someone without multiple Chemical Sensitivity Disorder). HMMM! I began to theorize that maybe I was POISONING ALL OF MY CUSTOMERS, but our “regular noses” just couldn’t smell it. I quickly began to research. Just what was in those chemicals? After all, they were EPA approved and biodegradable. What I discovered truly SHOCKED THEN HORRIFIED ME…

The EPA routinely approves products that contain known carcinogens (those are CANCER CAUSING chemicals) … I was AGHAST! I quickly realized that I need to do some research and change the chemicals that I used -FAST! So I got together with some of the countries top scientists. I met many very, very smart people who had already devoted their ENTIRE LIVES to the cause. I read TONS of material about mold and the different ways to KILL MOLD. I took ALL of the good ideas that I learned from all these sources and EXPERTS and… Then I FUSED them all together into a system that is absolutely LETHAL to mold but remains SAFE for your entire family! In fact it leaves behind NO known residual poisons that can make people sick. It cost me a FORTUNE to do. Our System: The first thing we do is isolate the attic from the rest of the house. Next we SATURATE all of the moldy trusses and sheathing with a disinfectant the uses the amazing power of Hydrogen Peroxide natures miracle disinfectant. The reason we start with this is when mold is senses it is being attacked it releases its spore into the air, a phenomenon called bursting or sporulation. Hydrogen Peroxide is unique among the mold killing chemicals as it is the only liquid I know that will completely destroy a spore (mold seed). This way we kill the spores before they can spread all over. Next we apply the stain removing solution. This is absolutely a must, because while truly only cosmetic in nature, failure to apply the stain remover will result in untrained eyes (home inspectors ) believing that the mold is still active. Next and most important to the warranty and long term efficacy of the process we actually impregnate the wood with an environmentally friendly solution of borate called ENVIROTECH WP. This is made from extremely finely ground and specially designed for dissolving borax a cousin to the old fashioned 20 mule team we use in our laundry. This product is absolutely amazing. It was designed to penetrate the substrate a full inch (remember mold roots only grow 3/16’s of an inch into the wood). It not only prevents all hosts of decay and dry rot fungi but it also prevents wood boring insects carpenter ants and termites.

Imagine you get a complete two for one bonus mold proofing and bug proofing in one fell swoop! Then we even dry fog the powdered ENVIROTECH WP all over the insulation. Lastly I discovered that the scientists at Los Alamos national laboratory have extensively studied how to decontaminate a civil facility like a house that has been contaminated by a spore based pathogen like toxic mold. The scientists concluded that if you only follow the guidelines recommended for mold that you will leave the structure contaminated with spore. They conclude that in order to fully decontaminate the structure/ area it is absolutely necessary to fill it full of toxic levels of a reactive gas like ozone. While other mold guys are still using poisonous ozone gas we use a specialty gas called ARAN. Which is a gas made of isotopes of pure oxygen that go all the way up to O14 which is far more reactive and far less poisonous to people. This gas penetrate the nooks and crannies and crevices in the attic where the liquid based chemicals/products can’t penetrate guaranteeing the destruction of any spores we remediators might have missed because we can’t see them (ten thousand spore can fit on the head of a pin). Finally we fog out our staging areas and any other areas of the property we’ve utilized guaranteeing we completely eliminate all threats to occupants.

So to recap:

1. Kill the mold with a special Hydrogen Peroxide based disinfectant.

2. eliminate the stains.

3. impregnate the wood and insulation with a non-toxic borate solution that prevents mold wood borers carpenter ants and termites.

4. Gas out the rest of the attic to eliminate the spore we missed.

This process is far more effective and contains more steps than any other company in our east coast area. We are so sure of it we offer the very best warrantees in the industry to protect our customers liabilities.

You Can’t Imagine How Many Times I’ve Heard Of Mold Re-occurring After Expensive Treatments From Basements STILL leaking following Expensive Mold Clean Up Projects and Attics Having Uncorrected Ventilation issues After Being Treated.

Attic Mold Remediation or Attic Mold Removal Should Be Performed By A Certified Trained Professional With Proper Protection, and Environmental Controls.

I hope This Article Saves You From Throwing Good Money Away, and risking your Health on failed, phony methods

If you’re looking for someone who offers these services in your area, Click here

Sincerely,

Source by Charles Boday

Busted – Top 3 Myths About An Air Conditioning System

Has your air conditioning system started malfunctioning just after a few months of installation? Well, it is not something that is only faced by you as a lot of people deal with the same issues. Instead of panicking with the thought that all your investment in the expensive air conditioning system you have just bought has gone away, you should see the issues minutely and find out the solution.

Panicking can seem to be relevant, but if you have somehow developed the false notions driven by the misconceptions you already have, you need a reality check.

Let’s face the fact. You cannot discard the HVAC system from your life as it becomes the saviour on the hottest summer day. Therefore, you need to get over with the misconceptions and trust believing on essential facts associated with the system.

Here are some of the misconceptions along with the truth beneath it you need to look at.

“You can cool down the room temperature fast by setting the temperature too low.”

Well, you have to realise that the air conditioning system does not work in that way. It absorbs the hot air in your room and drags it out through the ventilation. The room temperature gets cooled down automatically.

Even if you set the temperature of the air conditioner too low at the first place, it will continue to work at the same pace, leaving you with no options other than to wait. Instead, pushing the temperature to drop down drastically, it may leave an impact on the compressor, causing it to wear out too fast.

“Air conditioning servicing is wastage of money.”

Do you believe in this fact? If so, get ready to pay a ransom amount of money for the repairing work as the filters will stop functioning in the next few months. Moreover, it will also degrade the compressor and does not let the air cool down too quickly. Keeping the filters clean is essential to keep your house away from getting infected by a bacterial infection or allergen attack as the dust and dirt get accumulated in the filter.

Consider it mandatory to call up the professionals for air conditioning repair and make sure air filter is entirely free from dust particles. It will prolong the life of your system and give you a fresh breath of air all the time.

“Replacing the AC is always a better option than repairing”

Another common misconception regarding air conditioning repairing is to consider replacement as a better option than fixing it. A lot of people will suggest that the expenses you have to bear regarding AC repair is almost similar to the price of a brand new air conditioning system and therefore you should buy one instead of repairing the old AC.

Well, it is not the truth. It requires complete replacement only when there is no way out. Problems with the cables and other electrical malfunctions can also cause disturbances in the air conditioner. Hence, it is wise not to take any decision without a foolproof inspection.

Final Words

Make sure you call up a reputed service provider to get the job done instead of rushing to get the cheapest services. The experiences of the professionals can contribute to diagnosing the issue with your system and give you immediate solutions. Carry out extensive research to find out the best services in your locality and get significant advantages regarding work quality as well as the pricing.

Source by Natasha Unger Nandi

Evaluating Current Situation And Development Trends For The Bulgarian Real Estate Market In 2008

Nowadays, the Bulgarian real estate market is in a sufficiently balanced condition. There are a stable interest and demand, and on the other hand sufficient supply on behalf of local and foreign investors to meet this demand. The price increase is moderate, without sharp jumps, as the indications show about 50% annually; in other words except well-balanced, the real estate market is in a stable growth period. The sudden price jumps, the stagnation, the lack of new construction and the lack of demand remain in the times past. As a matter of fact, the demand has always been there, but it used to be either avalanche-like or it was turning into a small flow and therefore usually the buyers could not find that what they were looking for. Things are different now. There are many sites, available in varied price ranges, at different distance from the sea, which in itself influences the prices. On the market the sites differ by their area and planning. To a great extent the variety refers to the apartments and the apartment complexes. The private houses are also widely represented on the market, however, the difference in the house demand compared to the apartment demand, is that no foreigner would buy an old-construction apartment, but the demand of old houses is as stable as the demand of new houses.

Of great interest are the areas located within close proximity of the sea – in Bulgaria the length of the coastline is approximately 240 km. The resource is vast; a lot of the attractive plots with a varied-size area, available especially in such regions, are suitable not only for high-rise construction, but also for building of private houses and villas with a magnificent sea view and scenery.

Land properties are wanted as in the vicinities of the large seaside cities, such as Varna and Burgas, as in the area of the summer sea resorts, such as Golden Sands, Albena, St. Constantine and Elena, Sunny Beach. As a general rule, the most preferred ones are the localities where the infrastructure is already developed.

Here is an interesting fact: if earlier the resort apartments were mostly bought for the purpose of seasonal living, thus more often now, the owners stay living in Bulgaria all year round, go on sight-seeing journeys all over the country, including to the uppermost west regions, to enjoy the natural resources and the variety of resorts. The customer service enhancement in the apartment complexes and the resorts in the country has proven its positive effect on the buyers’ choice. All sites are provided with all-year-round maintenance and security guarding, restaurants and shops, indoor and outdoor swimming pools, gyms, bars, etc. Also very perceivable is the construction quality improvement, all the more that Bulgaria joined the European Union and it does its utmost to build as good as the rest of the European countries. For instance, there are more often sites with autonomous or central systems for heating and cooling of the interior premises. Due to the mass and progressively increasing competition in the sphere of construction, the building companies are frequently urged to bring in their tough business progressive technologies, materials, engineering systems and facilities, in order to ensure better habitability standards for the residential sites and to innovatively bring to life the latest scientific and technological achievements in the field of construction, production of building materials, and last but not least, to befittingly make use of the marketing and advertising art. Also a significant trump for them is the necessity of supply of such sites on the real estate market in the same price range as of the sites not particularly innovative as regards finishing.

An example could be the sites that are being built in the quite popular residential area in Varna, called Breeze. Both buildings – with high quality interior and exterior finish, where the apartments are of the same price range, but in one of the sites every apartment is planned to be equipped with the newest autonomous system for heating and cooling of the premises by Daikin, a Japanese manufacturer, and in the second building – the apartments will be heated by regular converter air-conditioners, that is to say the market prices of the apartments are the same, but the level of their technical equipment is different. There are many examples as this one.

If we give consideration to the sites that enjoy the highest popularity among newly arrived buyers, the leading positions are taken by those complexes and small apartment buildings, which are located in the prestigious panoramic areas of Varna – Bulgaria’s sea capital, in regions such as Breeze, St. Constantine and Elena (sea & spa resort in the vicinities of the city), Primorski Park, Galata. The apartments in these areas are suitable as for a seasonal summer vacation, as for all year round living and business. Moreover, there still is a quite good demand for not too expensive complexes in the small resort towns, such as Kranevo, Byala, Nessebar – with pure nature and moderate resort activity. The rise in popularity of the big summer resorts, such as Albena, Golden Sands, St. Constantine and Elena, Sunny Beach – famous across Europe – and the apartment complexes located on their territory continues, all the more that the customer service standard in the country’s resorts gets continuously improved and gradually meets the requirements for a European-level service.

Taking a look at the construction materials, used in the building of these dwellings, we should gladly notice the increasing popularity of the German-made 15 or 30 cm red bricks, that allow mechanized application of gypsum plaster; 150 or 200 cement quality class; good exterior 4 or 5 cm polyurethane façade thermal insulation boards; ETALBOND-type aluminum façade panels, natural stone facing slabs of local or European origin; multi-chamber PVC window framing, double glazed window with tinted glass in a range of colours; polished aluminum tubing and connections or stainless steel tubes for outdoor and indoor railings and outdoor railings for terraces and balconies; high quality and Bulgarian and Spanish tiles and granitogres, sanitary ware and mixer taps, both regular ad designer series; high quality interior and exterior doors with natural facing; high class laminate parquet; natural plank wood flooring or classic oak patterned parquet; interior paint finishes – mainly durable innocuous water-based paints; water supply and sewerage mains of polypropylene pipes and connections; autonomous electric- and water-meters ; contemporary electric units with safety fuses and switches.

Looking at the new construction private homes, it may be remarked that this kind of building is mostly concentrated in new complexes of closed type, located either within close distance to a populated area, within the boundaries of small towns or villages, near the sea or the beach, as well as in the villa areas of district centres such as the cities of Varna and Burgas.

In terms of construction, the houses are monolithic, brick-built, two-storey buildings: as a rule, there are a spacious living room with a kitchen and some auxiliary rooms on the first floor and bedrooms on the second. Oftentimes, the second floor could be described as attic because of the type of the roof. The roof itself is either classic type of wooden beams with hydro insulation, ceramic or bitumen tiles, or a contemporary “flat” type with thermal and hydro insulation and finishing exterior bituminous membrane. Exterior 4-5 cm façade thermal insulation using a silicate plaster and paint. It is common to see houses with a stone base up to the level of the basement premises and garages. Furthermore, if houses are built in the style of the Bulgarian national revival, their particular features are the oriel and the partial or complete wooden planking of the second and third floors.

Frequently the roof of these houses is deliberately made of old Turkish-style tiles and the windows are double-glazed of stained glass or with window grating, in order to thereby invariably stick to the intended ancient style of the buildings. A quite common feature are also the working fireplaces in both modern and traditional natural stone style. The interior walls and ceilings are mostly plasterboard finished with mineral wool quilt provided for insulation. More often in the practice the walls and ceilings are finished with smooth gypsum joint-filling and high quality paint or with decorative plaster finish. The sanitary premises are fully finished and fitted, including room tiling, lighting, an electric water-heating boiler, equipped with sanitary ware, mixer taps, showers and shower cabins. As the newest standard in construction we can define the use of multi-chamber PVC window frames available in various finishes imitating wood or simply in white colour; a regular double glazing or stained glass double glazing in a few base colours; also the installation of high quality interior and exterior doors with natural facing, modern locks and hardware; the floorings are made of high class laminate parquet; natural plank wood flooring or classic oak patterned parquet; the water supply and sewerage mains is made of polypropylene pipes and connections, autonomous electric- and water-meters ; contemporary electric units with safety fuses and switches.

The equipment of the home with the most necessary communications, such as telephone, internet and television is a must. The installation of electric plugs, switches and lights on the walls and the ceilings is also obligatory. Often the properties allow having an original and impressive landscaping: a lawn and decorative trees, free-growing flower compositions, decorative blooming bushes etc.

The contemporary market and the services of specialized companies provide the opportunity of building indoor or outdoor swimming pools and non-complicated children’s water rides. As far as the market nowadays offers a rich variety of price options, it is possible to install such kind of a water system with comparatively small budget. The fences are usually erected on the base of reinforced-concrete rings – the fundament of slag blocks, concrete blocks; they can be solid or made of spans with wooden or concrete elements with openings. Tiling elements covering the top of the fence could also be seen; often the entrance gate is massive, made of wood or iron, with modern damper mechanisms to facilitate opening and closing of the wings;

As a rule the liquidity as well as the price of the land plots depend on their exploitability, on the availability of panoramic view and beautiful surroundings in the area where the plots are located, as well as on the distance to a populated area in view of the prospective connection of the plots with communications (electricity, water-supply and sewerage system, telephone and internet); the plot prices increase in proportion to their proximity to important natural resources such as a sea, beach, resorts; very popular among the local and foreign purchasers are the areas located near lakes and rivers which by the way is an incredible feature of the the southern part of the Bulgarian black sea coast. The method of acquisition and formalization of a land plot or any other property in Bulgaria is quite easy, starting with the reason that in Bulgaria the title to the land exists. If professionally organized, the period to purchase a real estate and formalize the transaction can be reduced to a minimum of a few weeks.

When wisely chosen, the area for purchase of an apartment, a house or a land plot can determine not only the comfortable vacation and lifestyle of every one, but it also involves the golden opportunity for quick and profitable resale of a particular real estate.

On the other hand Bulgaria is rapidly renewing its popularity among the Russians and the Balts not only as an interesting tourist destination but also as a destination for profitable investment of capital with quite quick return. We can give an example by indicating a part of the clients of our agency – Dao Real, who invested in fully finished apartments in Varna City during 2006 and at the end of 2007 sold them through our direct mediation service without any additional costs on the apartments earning a profit of 35 000 to 50 000 euro. In terms of the country’s good political line – on the one hand, as a current EU member, Bulgaria has fulfilled all the eligibility requirements and directives for the country’s faster joining the Schengen area, and on the other hand, it implements a smart policy of development of mutually beneficial foreign-economic and cultural relations with Russia – the expectations are for further development and preservation of the country’s popularity among the Russian and EU purchasers and the investors. The topical of today is the large-scale construction of malls, department stores and business centers in the cities, which are developed not only with the joint capital participation of both local and foreign big contractors but there are also projects that are 100 % financed by funds of European contractors and organizations.

The local city authorities render complete assistance to the investors and developers for infrastructure development and renovation, as well as for supply of the necessary powers and public utilities to the area, where the site is located. The fact that there is an interest and investment of western European funds in the country shows itself the increasing stability in the region. The first shopping malls and business centers based on the European model have already been built and are in operation, but there still is big deficiency in buildings of that kind. Formerly, the offices and the small stores in Bulgaria were often situated in hasty re-fitted apartments on the first floor in common residential buildings. Now the number of such type of “offices” quickly decreases, all the more that a law on their forbiddance and gradual elimination is being adopted. In general, Bulgaria can be described as Eden for the investors, an undeveloped niche market, where formerly there was nothing special and nothing much happened, but where tranquility has always existed. Now it is the right time to make and concentrate serious investments in the Bulgarian real estates and development; and to receive such a great profit that would be too difficult to earn in any other European country.

Source by Javor Nachev

Options for Beautiful Outdoor Garden Lighting

Applying outdoor low voltage lighting to gardens is a specific application of low voltage landscape lighting. Every garden is unique and reflects both the gardener and the particular landscape effects the garden creates. In fact, there are just as many definitions of a garden as their are gardeners.

Most people today refer to flower gardens and not vegetable gardens when they talk about lighting. But gardens can be hedges, or trees, or cactus, or various combinations of any of these.

Most experts agree that gardens should be lit vertically rather than horizontally. This means the lights should shine up and down, or preferably from above or below the plants to get the effect of the sun shining down on the plants or a reflection of the sun from underneath. This is considered to be the most natural way to light a garden. To achieve this effect, lighting fixtures can be attached above the garden, on trees, walls, fences or even architectural elements. This also keeps the lighting elements safe from being knocked about by children or pets.

Since the garden lighting will be displayed in the dark, it’s important to make people feel safe and comfortable at night in the garden. To do this, experts recommend you add lighting to pathways, borders and boundaries to give a welcoming effect. If you’re worried about the lights attracting insects, you can add a blue light further away from the garden to attract insects away from the garden. Insects can see a blue shade of light the best, and most will flock to that light.

As far as the type of lighting that is optimally used for outdoor gardens, LED’s are the consensus choice. LED’s offer bright light that can be supported by batteries or even solar power. Their small form factor makes them ideal to use for paths, borders, walkways, fences, statues and even above and below the garden.

When using solar LED lights, their most popular form comes in staked versions which can be hammered into the ground to act as path lighting. On the top of the lights are usually small solar panels which will store power from sunlight during the day and automatically light up the area around them for a few hours at night. LED string lights are also a good option for hanging on fences, walls or borders, offering lots of light with little work to install.

Source by Lydia Quinn

How to Prevent Your Headlight Bulbs From Blowing Too Frequently

If you find your headlight bulbs are blowing on a regular basis, then there could be several reasons why it is happening and by identifying what the cause of the problem is, you will save yourself the cost off continually buying replacement bulbs, and the hassle of needing to constantly change them.

Are You Using Your Headlight Bulbs For Long Periods?

The typical expected lifespan of a standard halogen headlight bulb is around 350 to 400 hours, so if you are driving a lot during the long winter nights or even if you keep your headlights on during the day it is possible that your bulbs could only last 2 to 3 months.

Its important to note that if you have fitted upgrade xenon bulbs they will normally last only around 200 hours, because they have been in effect tweaked to improve their light output. For drivers who do use their headlight bulbs for long periods you can reduce the amount of time between changes by fitting long life headlight bulbs.

These tougher car bulbs contain heavy duty reinforced components and so last normally three times longer than standard halogen bulbs, whilst still offering the same lighting performance as normal halogen bulbs.

Are You Touching The Glass Bulb When You Change Them?

If you touch the glass section of the headlight bulb with bare hands, the natural oils within your skin will leave a small residue of grease behind. Once the halogen bulb is illuminated this oil patch will create a hotspot within the bulb and lead to it failing early. Therefore it is a good idea to wear latex gloves when installing new halogen bulbs.

Are The Bulbs Getting Wet Or Suffering Excess Vibration?

Whilst most of the major bulb manufacturers used toughened glass in the construction of their headlight bulbs, they are still vulnerable to the effects of thermal shock. This means that if they come into contact with water that has leaked into the headlight unit, then it is very likely that the bulb will be damaged. It is also important to ensure the bulb is securely installed as otherwise the extra jolts and bumps it will be subjected to can damage the filament

Is The Car’s Electrical System Working Correctly?

When installing the bulbs make sure that the electrical connectors from the lights power lead are firmly joined to the metal connectors on the base of the headlight bulbs, otherwise it is easy to get a short circuit and blow the bulb.

It is also important to check that the alternator is not overcharging the battery and delivering more voltage than the bulb is designed for. Typically the maximum voltage of a bulb is around 13.2 volts.

Are You Buying Good Quality Headlight Bulbs?

Whilst cheaper car bulbs may seem like a good idea, they normally lack the high quality and precision components used by the leading manufactures like Osram and Philips, and will not last as long. High quality bulbs will be marked with the E1 mark, which indicates they have undergone the most rigorous testing and quality standards.

Source by Ethan Melandri

The Jani-King Rumors Are Unfounded

In today’s uncertain economy, more and more individuals are searching for legitimate opportunities that offer them the chance to be their own boss. While there are several franchise opportunities available to choose from, finding a franchise that is flexible, affordable and highly ranked is extremely important. Despite the claim of a Jani-King scam, the company is ranked as the number one commercial cleaning franchise by Entrepreneur Magazine and is seen as a great opportunity for those with limited funds to invest. If franchisees put in the right amount of focus and effort, and following the business methodologies that the company teaches, they will have more chances to do a good job.

The King of Clean is the world’s largest commercial cleaning franchisor and has consistently topped the list as one of the top 10 franchise companies throughout the world. Founded in 1969, the company has been giving entrepreneurs the tools and concepts necessary to build successful franchises for over 30 years. While the claim of the Jani-King scam has made many prospects skeptical of the opportunities offered by the company, press releases and research conducted by a number of different reliable sources including Entrepreneur Magazine has found these claims to be unfounded. If the Jani-King scam existed, the company would not be ranked number one Home based Franchise and number two low-cost Investment.

After being the number one commercial cleaning franchise company for 23 years in a row, Jani-King’s unique concept is a successful one for entrepreneurs who are willing to follow the business model. With a network of regional support offices, franchisees can receive assistance in building their franchise and building their profits. With its financial strength, stability, marketing concepts, and growth rate, it is no surprise that the company has been recognized as a top performer in the industry. Read into the opportunity and make your own decision on the untruths of the Jani-King scam.

Source by Larry Carnier