Daily Maintenance of Ice Block Making Machine

The ice block making machine is designed with higher technology than other refrigeration equipment. The operating environment, daily maintenance and repair, both of these factors have great influence on machine’s service life and ice generating effect. So, how to prolong the service life? Let’s see some tips about daily maintenance of the ice block maker below.

Firstly, it should be installed far away from heat source, and at the same time, this ice maker could not be directly shone by the sun. Ambient temperature should not exceed 35°C and the installing place ought to be well ventilated.

Then you should pay attention to the gap of installing. The gap of back as well as sides of it should no less than 30 cm from the wall, while the top part should no less than 60cm.

Ice block making machine should use separate power supply, special electric power supply loops, fuse protector, anticreeping switch, all of these should be grounded firmly.

The water used in the ice making machine should comply with state drinking water standards and water filtration device should be installed in order to filter impurities in water, or the pumps, clean sink and ice mold might be blocked by these impurities.

Handle with care when carrying the ice block making machine and violent shock should be avoided, carrying slope should no less than 45 degree. After short-distance transport, it should be rest for 2-6 hours before working.

Turn off the power when cleaning the ice block making machine, strictly prohibit wash with water pipe directly at the body of the equipment and clean with acidic, alkaline and other aggressive cleaning solvents, neutral detergent is recommended.

Water supply hose should be opened every two months to clean the filter inlet valve, thus avoid intake infarction that caused by sand or other impurities.

Sweep dust on the condenser surface every two months. Use vacuum cleaner, small brush to clean the device, strictly prohibit use sharp metal tools.

Clean the water pipe, sink, ice storage box every two months.

When doesn’t use ice block making machine for a long time, the machine should be cleaned and dried before putting away. The ice block making machine should be put in a ventilated and dry place, avoid being placed in the open air.

Source by Maia Liou