Muhammad Mukarram Technical Services L.L.C

Category Blog

What’s The Deal With Light Switch Installation?

There are many times when a homeowner wishes to change the location of a light switch or install a brand new switch in a renovated room. Unfortunately, the process can be difficult for beginners and requires dealing with electrical wiring. It’s usually best to consult a residential electrician before cutting into the drywall and handling wiring, even if the power has been disconnected properly.

Moving a Light Switch

Sometimes moving a light switch to a completely different area is necessary. Some homes, for example, have poor wiring design and place all outlets on one side of the room. Moving a switch, however, can be a fairly complicated process and requires first turning off the power to the area. Next, a hole must be cut in the drywall and new 14 gauge wiring must be run to the new location. Passing wall studs requires cutting a one-inch hole into the drywall at each stud which must be patched later. It can take many hours for an amateur to move a light switch but an electrician can complete the task quickly.

Light Switch Installation

Installing a new light switch can be even more difficult than moving an existing wall switch. There are three main types of switches to choose from: toggle, mercury and silent. Complete installation of a new wall switch requires cutting into the drywall and feeding wire through the wall to the new source. Electrical wiring must be stripped and properly installed on the new switch to control a single light. Because of the complexity of the installation it’s best to consult a residential electrician to avoid wiring mistakes or injury.

Warnings about Electrical Wiring

The main reason to consult a professional before installing or moving switches is the danger involved. If the power to the area is not properly turned off it’s easy to experience electric shock. Electrical wiring in a home carries enough power to cause injury or death from electrocution. Another problem with an amateur doing wiring work is the risk of improperly installed wires. Wiring that isn’t insulated and protected properly poses a high fire risk. Residential electricians are qualified to move and install wall switches because they have the training to prevent safety hazards during installation.

How to Choose an Electrician

To select the right residential electrician for light switch installation it’s important to check qualifications and experience. Any electrician should be licensed by the proper authorities in the area. The right electrician should also have years of experience working in the community. Always ask the electrician about any warranties or guarantees they offer on their services and select a contractor that has positive reviews from previous customers.

Many homeowners attempt light switch installation as a do-it-yourself project. Unfortunately, dealing with electrical wiring presents a number of dangers and may result in unsafe wiring. This presents an electrocution and fire hazard. Although it is possible for an amateur to move a light switch with detailed instructions, it is best left to a professional who can ensure the job is completed safely and quickly.

Source by Bob D. Lord

Argenus Review – A Better Air Sanitizer

The Argenus Air Sanitizer system is manufactured by the Hunter Fan Company. Hunter is a well known and trusted company that stands behind their products. Their products are known to be efficient, quiet, and durable.

Now Hunter has manufactured the Argenus Air Sanitizer which is also known as the ‘air sterilizer’. This higher level of technology that Hunter has introduced with the Argenus Air Sanitizer captures and kills airborne germs.

The Argenus uses a highly effective method of a barrier filtration in conjunction with electromagnetic attraction. This dual filtration system attracts and kills better than 99% of airborne germs and allergens. This system used in the Argenus offers air quality unmatched by other air purifiers on the market today.

Treating indoor air eliminates the harmful allergens and pollutants that contribute to unhealthy air quality. The Argenus Air Santizer system is head and shoulders above the competing air purifiers offered by other manufactures such as the Ionic Pro or Ionic Breeze. Ionic Pro Air Sanitizers capture airborne particles but Argenus contains and kills the offending airborne particles for a cleaner, fresher indoor air quality.

Argenus uses unmatched technology to capture and neutralize any size microscopic particles. Using an Argenus Air Sanitizer is also very cost effectiveness. Used on a low speed the Argenus consumes only about the same amount of energy as using a single light bulb for a month. In addition, Hunter stands behind its products and offers a full 5 year warranty with a 30 day money back guarantee.

The Argenus is about 20″ x 20″ in width, stands about 24″ in height, and weights about 35 pounds. The Argenus Air Sanitizer is certified to clean the air in rooms with up to 450 square feet in less than an hour. It is recommended to position the Argenus Air Sanitizer in rooms that are used the most. A second Argenus may be needed for adequate air cleaning if the home is divided into more than one common use area.

The maintenance for the system is easy and convenient. The filter should be changed routinely to offer the highest level of air sterilization. The main filter needs to be changed every one to two years depending on the air quality conditions. The Argenus has a filter indicator that lights up when the filter needs to be checked for replacement. The filter is also color coded for easy filter changes.

There is also another prefilter that is permanent, never requiring to be changed. Keeping the permanent filter clean simply requires vacuuming and then replacing it back in the unit. There is also an indicator when the permanent filter needs to be cleaned, which is usually about every three months. Hunter is currently offering for a limited time free Argenus Core Filter replacements for the life of your system.

Hunter Fan Company has manufactured a quiet, high quality air purification system for improved indoor air quality. The Argenus Air Sanitizer is unlike its competitors by capturing and killing the harmful germs and bacteria that deteriorate air freshness.

Source by Alan Zakon

Details About HVAC and Air Conditioning Systems

The terminology of this process is often used for HVAC. HVAC is Heating Ventilation and air conditioning service. It is used to give a freshness life.

H-Heating

Heating is mainly used in winter areas. It will maximize the temperature by the thermal energy and produce the heat. Cooling process is similar to heating but it will minimize the temperature by the thermal energy.

V-Ventilation

Ventilation is an air circulation process from the open space and enclosed space. It is very helpful and safety in case of fire. It is mainly used for adding an external fresh air and maintains a gas

AC – Air conditioning systems

The main process of HVAC are controlling the temperature and filtration of air and then supply the outside air for controlling oxygen and carbon dioxide in the space. These are all the features of dusted heating ventilation air conditioning Sydney. Commercial air conditioning range is using the window AC and split system. This process will maximize the relative humidity by increasing the water vapour.Dehumidifying is similar to same process but it will remove the water vapors.

This service is used to give a comfort condition for human beings to feel a good. Cooling service is one of the important needs for human begins in this modern world. Human begin have a professional work so they can not feel good in comfort. This service is very helpful for all that time. Because room temperature become very high and body heat will combine. So they feel an uncomfortable mind.this process is very useful for human begins in home of office. Fresh air is free from dirt particles, bacteria and unwanted pollution of smokes. Windows must be closed in office rooms and house room sectors. The noise was reduced while using the types of services.

Air conditioner installation noise is very low. This will give the nice sleep at every time and maintaining the peaceful in cinema theatres and running hospitals. Any noise inside the room should be reduced by sound controlling facilities. Industrial air conditioning will take the fresh air inside the room at any time by opening the room. This service is mainly used to remove the warm air from particular place and rotates it back after cooling it. This is all the main process of cooling things in heating process.

Source by Paul Micky

Air Conditioning Service Tips That Can Save You Money

Your thermostat should be properly calibrated. This will ensure accurate temperature control and operating cycle. This will save you on operating cost and assure your comfort level.

Improper refrigerant charge can damage your compressor, which is the heart of your air conditioning system; this is an expensive air conditioner repair. Systems improperly charged will cause increased electric bills because this will reduce the efficiency of your air conditioning system. The proper refrigerant charge will provide longer equipment life, lower your utility bills and reduce the need for air conditioning service.

A dirty condenser coil (outside unit) will reduce your air conditioning systems ability to remove and reject heat from your home. This will cause your system to run longer and increase your electric bills. The benefit of a clean condenser coil is proper heat rejection, reduced run time and lower energy bills. A dirty air conditioning condenser can lead to system failure and the need for you air conditioner to be repaired.

Dirt and house dust that escapes through your air conditioning filter can cling to the cold moist coil. This will restrict the air flow through the coil reducing your air conditioning system of performance and capacity. Maintaining the evaporator coil will ensure that proper air flow is delivered to all areas of your home, increase comfort levels, provide better dehumidification, and a cleaner healthier indoor environment. Inspecting and changing your air filter on a monthly basis will help prevent air conditioner repairs.

As your air conditioning system removes heat from your home, humidity is extracted from the air. The condensation created by warmer air passing over a cold coil must be drained from your system. This is done through a condensate drain line. The drain must be checked and cleared of algae build up or foreign particles clogging the drain, which could cause water damage to the ceiling or floors of your home. By keeping your air conditioner drain line clear you will reduce the need for air conditioning service and overflow problems which can result in water damage. Proper draining will also aid in maintaining indoor humidity levels.

Dirty blower wheels can affect the air flow to your home; limit your air conditioning system’s capacity and your comfort. It can also spread dust particles which irritate sinus and allergies. A clean blower wheel and fan motor will provide maximum air flow, improved comfort levels and proper cooling. Most of air conditioner repairs are caused by dirt and the lack of maintenance.

Moving parts in need of lubrication can cause increased electrical consumption and air conditioner repairs. This is due to additional power required to overcome the resistance in motors and drive shafts that are not lubricated. Proper system lubrication will offer smooth motor and shaft operation, extended part life and less air conditioner repairs.

The electrical components on your air conditioning system should be inspected regularly for signs of wear. Faulty electrical components can lead to very expensive air conditioning repairs. A thorough inspection will reduce the need for air conditioner service if the faulty or worn parts are replaced when found.

Following the above tips will help reduce the amount of air conditioner repairs you will encounter over your air conditioning systems lifespan. If you are in need of air conditioner service make sure the company you choose is licensed and insured to do the required work.

Source by Mike Strobel

How Can Ready Mix Construction Materials Benefit The Builders?

Meaning of ready mix products is that they are readily available for use. For example, consider material used in the floor and wall plastering processes. It is mixed at the construction site using raw materials like cement, sand and water by the workers. But in case of the ready mix plaster, all these ingredients are premixed in specific quantities by the machines in a production plant. One can use these pre-mix plasters instantly by just mixing water. Hence, we can say that ready mix products are the one that can be used instantly to reduce efforts and time taken for the process. This is the primary reason why many builders today are using such materials in their projects. These products will offer them many benefits.

Reduced Efforts: The use of ready mix products minimizes efforts of both the builders as well as the laborers. Builders will now have to search for limited manpower for their projects which makes their task much easier. Moreover, laborers will not have to do the entire A to Z process to create the construction materials at the site because they are now readily available.

More Savings: Using ready mix products will not require much labor at the construction site. Builders can now hire only a few laborers for the cause and save up their labor costs. Not only in terms of cost, but builders can also save up their time which otherwise would be required in finding and hiring the laborers for their project.

Lesser Process Start up & Project Completion Time:

When a builder uses ready mix products in his construction venture, he can definitely complete his project in much lesser time because these products will greatly reduce the process start-up time.

Finest Quality

Such products are mechanically mixed and hence the consistency is assured. Builders can accommodate ready mix products for consistent quality in their construction projects.

One of the best examples of such ready mix products gaining recognition in construction industry today is a polymer based dry mix plaster which the builders today are using to speed up the process of plastering in their construction projects. This is a kind of ready mix dry plaster which comes mechanically mixed with ingredients like cement, dust-free sand, polymers and selected additives which make up for a good plastering material. It can be used instantly on the site by mixing appropriate quantity of water. So now builders can say “no” to the lengthy plaster mixing procedures and save up time in their construction projects.

Similarly even ready-to-use polymer based tile adhesives are available in the market these days. Cement, sand and chemicals usually go into manufacturing these adhesive products that enable tight bonding of tiles to the substrate. Generally used for wall and floor tiling processes these adhesives are known to ensure quality tiles fitting process with excellent bonding and low shrinkage features. Application of such readily available tiles fitting adhesives enables faster and efficient tiles fitting, thereby saving up lot of construction time for the builders to employ on other important processes in the project.

Hence, with advantages of ready mix products, they certainly cannot be neglected. Incorporating them in construction projects would definitely be a good job for the builders.

Source by Vasant Mungara

Riobel Faucets Review: A Few Things You May Want to Know

A home can’t be called a home if it does not contain any faucet. Whether you realize it or not, faucets are crucial fixtures that are perfect in managing the ever precious water. Unfortunately, most people don’t realize the importance of carefully selecting their faucets. If you deliberately chose Riobel Faucets for your kitchen and bathroom needs or if you bought them because they happened to be the most available when you needed faucets, then this article is for you.

What are Riobel Faucets?

These are basically faucets made by the Riobel company. They vary from other faucets by virtue of the brand name Riobel and the emphasis the company places on its products. Riobel has the self-defined mission of providing the best faucets, shower systems and other related products to the general public. This company already has around 15 years of beyond satisfactory service to its pleased customers.

Why are faucets made by Riobel different?

Although all companies constantly spend on the development of new product lines and preserving high quality standards, Riobel differ from the rest in terms of the kind of people working for it and the type of consumers advocating its offered items. Riobel has a very strong grasp on the reality that vigorous enthusiasm is essential in everything its people do, especially in ensuring that trusting clients will be aptly aided in achieving hassle-free home maintenance or renovation.

Riobel’s faucets are conceptualized and manufactured in such ways that the buyers will not have so much trouble installing them. Mechanical parts can just be purchased swiftly, because they are conveniently placed above many counters. This customer-friendly environment allows faucet owners optimal cleaning and maintenance success. With Riobel being distributed by a very fast network, it is logically expected that customers can make the most out of Riobel products. The company also does its best to make sure that the product design, actual manufacturing process and quality control system will produce completely durable products. This durability prevents unnecessary expenses that may be brought about by frequent repairs, replacements or product upgrades. To provide additional customer protection, these long-lasting products are backed up by limited lifetime warranties.

What kinds of faucets does Riobel make?

Riobel manufactures durable, visually appealing, warranty-protected and well designed faucets for kitchen or for bathroom uses. These faucets come in different models that will definitely cater to the aspiration of all person types (be they classical, contemporary or midway between the two). A few designs are perfectly similar to the faucets that can be normally seen in public establishments and typical households, while most of the designs provide uniqueness and an additional layer of personality. These designs are based on varied references and inspirations, such as adherence to classical designs.

Aside from overall appearance, Riobel Faucets also vary in terms of the applied finish. Options include brushed bronze, brazen bronze, polished chrome, brushed chrome, polished nickel and brushed nickel. Aside from adding another dimension in visual diversity, these different finishes also provide different textures and endurance levels.

Source by Arrick Chakraborty

What Are the Benefits of a Concealed Cistern?

Nowadays there is an enormous range of design options available to anyone remodelling their bathroom or even building a new one. Along with the selection of various bathroom fittings and furnishings is the new and attractive option of wall hung toilets and concealed cisterns.

The concealed cistern is becoming an increasingly popular choice with homeowners due to a number of purported benefits that it can bring to a bathroom. Unlike with a conventional toilet, the cistern is concealed from the naked eye, instead hidden behind a wall. Combined with a stylish wall mounted toilet bowl, it is not hard to understand the benefits of such an installation.

Firstly, a concealed cistern generally makes for relatively simple maintenance, despite the fact that it is hidden behind a wall. Access for any repairs happens through the flush plate, which is visible in the bathroom. Although the cistern is concealed, therefore, it is not difficult to reach in times of need.

One other major benefit of the concealed cistern is the reduced noise in the bathroom. This is because most of the sound created by the flushing of a wall hung toilet is concealed behind the wall, therefore minimising the volume inside the bathroom itself. This can provide a more pleasant experience for the homeowner who has this kind of toilet installed.

Another advantage of the concealed cistern and the wall hung toilet is that they generally make for a much more hygienic and easy-to-clean experience for the homeowner. This is due to the design of the toilet, which is suspended above the floor and therefore creates space for cleaning the floor and wall around the installation.

It is also true that the toilet itself is easier to clean. Smaller in size and with fewer nooks and crannies, the cleaning of the toilet bowl is relatively straight forward with its clearly exposed, wipe-cleanable sides. Both these factors make for more rapid cleaning as well as a more hygienic bathroom.

Concealed cisterns also boast considerable strength and durability, despite these qualities possibly seeming unlikely attributes of a toilet that is effectively ‘hanging’ off a wall. With the concealed cistern being able to bear up to 400kg in weight, with professional installation it can very easily support even the heaviest of individuals who use it.

There are also environmental advantages to using the wall hung toilet and a concealed cistern. This is because most flush plates have been designed with a dual-flush mechanism. This means that water is saved every time the toilet is used. Of course, the saving of water also brings financial benefits to the homeowner as well.

Despite all of these plus points, however, the perhaps most appreciated aspect of the wall mounted toilet and the concealed cistern is the fact that both of them are very easy on the eye. There are several factors which make the whole concept an extremely attractive option when designing and fitting a bathroom.

As mentioned before, as the cistern is placed in the interior of the wall, there is very little clutter in the actual bathroom itself. This makes for a much cleaner looking design in a bathroom with any unsightly pipes and toilet parts hidden from plain view.

In addition to this, there are number of attractive designs of wall hung toilets now on the market, including classic luxury styles and colourful and quirky options. The vast range now available allows for greater customisation options for a bathroom redesign or build, and means that homeowners can find something that is truly tailored to their taste and the ‘feel’ that they want to create.

This kind of toilet and concealed cistern are also perfect for anyone looking to create a modern and minimalist look in their home. The streamlined shape of the wall hung toilet can be a perfect addition to other contemporary features such as a frameless shower enclosure or wall hung sink.

There are several major benefits to installing a concealed cistern in a bathroom, ranging from the practical to the stylish. In all instances, consulting an expert in bathroom fittings is recommended to ensure that everyone is able to create a bathroom to fit their specific desires, requirements and tastes.

Source by G Lever

Top Gutter Cleaning Tips

What Everybody Dislikes About Gutter Cleaning and Why

Gutter cleaning is a messy endeavour and there’s also the security aspect to worry about also. Such cleaning isn’t as simple as cleaning gutters, therefore, professional help is recommended. High pressure cleaning is easily the most productive way of cleaning your house, factories and equipments when properly executed. While you are becoming professional after building cleaning, you may also get some instructions about how to keep the normal cleanliness of the home afterwards. Rooftop cleaning isn’t as simple as it sounds, in reality it’s quite a risky undertaking to do, and must be accomplished by professionals only. Mattress cleaning in regular interval is the sole objective that may keep the asset in the very best way.

How to Find Gutter Cleaning

Traditionally, guttering was mostly made from heavy substances like cast iron. Half round gutters are a favorite selection for people wanting a historical appearance.

Cleaning a drain is among the toughest jobs, but even though it’s acknowledged, it should be cleaned regularly. Calculating the precise drainage of your gutter process is beyond the range of this short article, but a couple of rules of thumb can steer you to the correct alternative. Water will flow through these forms of gutter guards. Apart from this, you also need to attempt to analyze whether you will use the water only for household purpose or even for gardening needs. It is going to be wise that you ascertain the total amount of water needed by the members of your residence. There are a number of different explanations for why you may want to collect rain water from your gutters of your property.

Gutter Cleaning – the Conspiracy

Roof construction is a significant number of hidden works. Professional contractors don’t feel hesitated while talking about their contract terms and also assist you in understanding it by proper explanations. It’s a good idea to choose local roofing contractor for your undertaking.

You may try to reach until the roof with a roof rake to take out the ice. For this, it is critical to call an expert roof repairing service provider. If such roof is not correctly installed, it can cause unwanted leakage to your home causing interior damage that could be quite costly to fix. A clean house is the way to wash and wholesome way of life. Guttering is critical for keeping your house in working order, so having a less costly alternative is an exemplary way to have the ability to continue to keep your home well-maintained.

The Honest to Goodness Truth on Gutter Cleaning

If there’s any pooling within the gutter, then it’s pitched improperly. The same as modern garage doors, gutters can be constructed to complement the over-all look of your residence. Your gutters ought to be sized depending on the maximum rainfall it is possible to anticipate, not the typical rainfall. In the event the gutters become filled with leaves then this can lead to flooding and other issues. Clogged gutters may lead to various harmful diseases since they become the ideal breeding ground of mosquitoes and deadly bacteria. K-style gutters are somewhat more modern and represent most rain gutters found today. Plastic gutters are growing in popularity for numerous factors.

They help a lot to homes in order to stay free from water while there is a heavy rain or melting snow. First thing to do is ensure that the gutter is in fact overflowing, as opposed to leaking as a consequence of a faulty part or other issue. As a consequence seamless gutters have come to be the most popular choice for new homes. They consist of a single gutter that is custom-sized to fit your roof. So plan and forecast well before you buy a gutter and get it installed in your dwelling. If you suspect that the gutters on your home are too small for the work then an upgrade to a bigger size might be required.

Gutters come in a number of types, styles and materials. You have to wash the gutters at least one time in every year. Besides saving your house from getting affected by the gushing rainwater causing damp and debris, it’s also helpful in safeguarding your gutters too. You can chose rain gutters made from many different materials. Your rain gutters handle a great deal of plain water. In all of the safety actions, it has a significant importance. Rain gutters and downspouts are located in nearly every house.

Source by John Bright

Solar Job Training – Preparing For a Career in the Growing Solar Power Industry

As of March 2009, economic reports confirm that green collar jobs hold this economy’s most promising career paths. People with technical skills and expertise on energy and electricity production and distribution, equipment installation and maintenance, particularly those who have participated in or taken solar training courses, are at great advantage. With the current US administration backing up the development of alternative energy sources, it is predicted that the solar industry will achieve a 30% annual growth and more.

Throughout the globe, the United States is not alone in its initiative in advancing its energy sources and properties. There is also an observed increase in the demand for green collar jobs in many European and Asian countries. Today, US companies take hold of the most development projects in honing solar energy. These companies are taking advantage of the increasing demand for renewable energy sources as well as the country’s tax advantage benefits. Hence, there is an open opportunity for people who are qualified for various solar jobs. Now is the best time to get some training and courses to qualify for professional solar jobs.

Thankfully, there are a number of solar trainings and courses that are offered to qualify technicians, engineers and other equipment installing, handling and maintaining workers for the much coveted green collar jobs. These learning programs are intended to break in people to the growing solar industry. With the hands-on training, solar business and finance management courses as well as solar marketing and sales strategies, people from blue collar jobs can smoothly make their transition into the green collar jobs that require similar expertise.

Below is the list of the training programs and courses that are offered to qualify for solar jobs:

  • Training on photovoltaic design, installation and applications to hone the expertise of technicians and engineers.
  • Grid-tied PV design training is a  focused in introducing modern ways of handling solar energy systems connected to the utility grid.
  • Advanced PV design training refers to the heightened level of PV design training, which requires the trainee to do the PV design and installation courses within strict NEC compliance.
  • PV lab management training is perhaps the ultimate hand-on training that a technician could get as it sets the participants in a direct field application scenario, handling and managing PV lab yards, giving them the opportunity to install and wire solar electric systems to different types of solar electrical system wiring configuration.
  • People from the traditional management and finance team can take advantage of the solar sales, marketing and economics courses that may be taken in a traditional classroom setup or online. The important point of this training is to train people from directly related blue collar jobs into the more specific marketing demands of solar energy systems.

The potential of the solar industry has long been determined. Until the discovery of the depletion of the conventional sources, the industry’s potentials have been set aside. Now, with the advent of the global go green attitude and the wide acceptance of the international community to solar energy as the closest alternative energy source, people who are qualified for green collar jobs can lead a successful career path regardless of the worldwide economic conditions and issues.

From welders, electricians, roofers to architects, integrators, general contractors and other building professionals, the high demand for people qualified of solar jobs gives light could be just the kind of opportunity that people can take advantage of after the struggles that the current economic crisis have brought in their careers. Green collar jobs gave the technicians and engineers as well as marketing and finance professionals a great opportunity to rise from the ashes of the economy that may have cost them their blue collar jobs.

By participating in the related courses and trainings that the government and the private training centers offer, workers can easily become qualified for the coveted job. As the key leaders in the global economy intend to invest on the solar industry in the future, these trainings and courses can bring many workers back on the job, not just any job but a well-paying job. High-paying job that preserved the environment; what’s a more ideal job than that?

Source by Detlef Warner

Air Ionizer Purifier Pros and Cons

More and more people are looking for an air ionizer purifier to improve the air around them. However, you should be aware of the pros and cons of these purifiers to determine if they are right for you.

Many people today are concerned with the quality of air that they breathe. From outside pollution to what is known as sick building syndrome there are all kinds of things you can breathe in that will make you sick. Which has led to the rise in air purifying machines, but most people probably do not that all these machines are not the same. You have ionizers, negative ionizers and ozone ionic.

Ionizers- Any machine that uses charged ions or particles to purify the air by attracting dirt and pollution, is known as an ionizer. You may have heard these called many names including, electrostatic, Ionic breeze, Truman cell and electric.

Negative Ion- It actually works in reverse to the ionizing air purifiers. Instead of drawing in the pollution, these machines put out negatively charged ions into the area. These ions trap odors, dirt and some pollution eliminating them from the air.

Ozone- an ozone purifier will take oxygen and its two molecules and create a third oxygen molecule that is released into the air. This third oxygen molecule is a very effective weapon against mold and odors in the home.

Pros

Air ionizer purifiers are a relatively inexpensive way to clear the air around your house. Many have removable plates that can be removed and cleaned periodically, unlike HEPA systems that have filters, which must be replaced periodically.

If you are looking for a way to clear tiny air pollutant particles from the air around your home, you want a machine that will get the tiniest particles possible. Many of the air ionizers will eliminate particles as small as.01 microns. This is especially helpful for individuals concerned about second hand smoke.

Cons

If you have a problem with dust or pollen, an ionizing model is probably not the best choice. In order to keep your air clear of these pollutants as well you may need to incorporate the use of HEPA filtration in addition to any ionizers.

While the ozone air purifiers are expected to release ozone into the air, you should know that all ionizing air purifiers will have this effect, at least to a small degree. The buildup of ozone in your home can be very irritating to sensitive lungs, so beware.

Conclusion

Can these air purifiers provide a better quality of air inside your home? Yes, these machines can be helpful; however, you must be aware of each models limitations and functions. This is very important if you have allergies or asthma concerns. Remember that even with air purifiers you will still need to vacuum and dust regularly to keep indoor pollutants down.

Source by Mark E. Richardson