Muhammad Mukarram Technical Services L.L.C
Entrepreneur Or Business Owner? The Choice Is Yours

Thinking of starting a business? Kudos to you. Hold on tight, it can be a wild and woolly ride.

You can take some of the scary out it by understanding the huge philosophical distinction between being an entrepreneur and being a business owner.

It’s a commonly held belief that by simply taking a risk in business one has achieved the status of entrepreneur. While that may be true from a strictly etymological perspective, the culture of modern business and entrepreneurship might suggest otherwise.

To better understand the distinction, let’s take the case of two men in business. One imaginary plumber we’ll call Joe and one, very real, Bill Gates. On some level, both of their businesses are similar.

On a philosophical level, however, the two approaches to business couldn’t be more different. Those differences can be tracked all to the way to the “back of a napkin” stage of business development.

Bill Gates saw that personal computing would become the central focus of our business and personal lives, and set out to control the operating system that forms the very foundation in over 90% of the world’s computers. To ensure full market penetration and adoption, he also took control of the markets and the means of delivery.

Gates didn’t invent the technique of controlling both the product and the market. In fact, the entrepreneurs who did invent that technique were the same luminaries that are the pillars of American business. Names like John D Rockefeller, Andrew Carnegie and even Thomas Edison are all associated with total market domination. Love him or hate him, Gates is in good company.

Joe the Plumber’s vision, on the other hand, while no less worthy, was somewhat smaller in scope. Recognizing a demand for installation and maintenance of plumbing systems, Joe set about creating an organization that provided a high paying and sustainable job for himself.

Joe makes a decent and respectable living. But he can’t take time away for a vacation with his family or the business will suffer, and revenue will fall precipitously.

Joe certainly can’t afford to get sick.

So he toils away, no matter the conditions, content to be his own boss. But Joe has scores of bosses. Customers, lenders, contractors, suppliers, Joe is answerable to them all. His dream of personal freedom has given him an eighty hour workweek with no exit plan or escape route.

Which business would you rather run?

It deserves to be said that Bill Gates is the product of one of the richest families in the Northwest US. He’s not what we might call a “self-made man”. But the track record for lottery winners suggests that having money isn’t enough to guarantee financial success.

In fact, it’s a useful exercise to answer the question, “If I had an unlimited amount of money, what type of business would I start?” From there, determine how to, as Theodore Roosevelt said, “Do what you can, with what you have, where you are”.

Spend some time to determine what type of business person you are and you’ll have a stronger and better supported organization, no matter the form you choose.

Source by Carl Donovan

Amega Global’s AM Water Actify – Red Bull of Water Ionizers

INTRODUCTION

A micro-clustered (6x smaller in molecules), zero point energized, ionized, anti-oxidant, alkaline hydrating technological WUNDERKIND! Why is the AM Water Actify the ‘Red Bull’ of water ionizers? As opposed to any other water ionizer on the market this one uses Amized Fusion Technology and Zero Point Energy to activate the H2O.

THE IMPORTANCE OF WATER

Everyone knows that water is an essential part of a healthy life.Next to the air we breathe water is the most essential component to life. Water makes up 2/3 of the weight of the human body. The brain is 75% water, the blood is 83% water, bones are 22% water, muscles are 75% water and the lungs are 90% water. Water does more than sustain life. Water is essential to the functioning of every single cell and organ system in the human body. It can actually improve our health, our fitness, and even our appearance.

WHAT WATER DOES

Makes up the majority of every cell in our body.

Is the biggest part of our blood and lymph systems.

Carries food and oxygen to the cells and carries waste away.

Helps flush our kidneys to get rid of toxic substances.

Helps balance our electrolytes, which helps to control our blood pressure.

Helps to moisten our eyes, mouth, and nasal passages.

Helps to keep the body cool when it is hot and insulates the body from the cold.

Acts as a shock absorber to cushion the body’s organs.

Helps lubricate joints and is part of your blood, sweat, tears, and saliva.

Can provide many of the trace minerals that our bodies need.

AMEGA AM WATER SYSTEM

The Amega AM water system, using innovative AMized Fusion Technology, is able to transform the unstructured water molecule back to its original crystalline structure, thus bringing out the life force energy.

THE 3 STEP AM WATER PROCESS

Step 1 – Ceramic Filtration

The hollow porous ceramic filter in the AM Water System is primarily for bacterial removal. It filters particles from water but leaves oxygen and mineral contents unchanged.

Step 2 – Carbon Treatment Purification

Inside the AM Water System is an activated pressed carbon-block filter. This carbon block effectively reduces:

Chlorine taste and odor.

Particulates, improving clarity.

More than 140 possible health-effect contaminants, including lead and mercury.

Activation Increases the Carbon Surface. Amega Global “activates” the carbon through a special process that creates thousands of pores. This increases the surface area available to attract contaminants. The carbon is then pressed together to create a fixed carbon block. This increased surface area increases the ability of the filter to attract and trap carbon-based contaminants as water passes through the block. Various other organic contaminants also tend to adhere to the porous surface, so the carbon-block filter acts as a magnet for contaminants.

Step 3 – Vitalization

The water in the AM Water system passes through a special vitalizer which transforms the broken molecular structure to its original life-giving super moisturizing state. Crystalline structured.

WELLNESS BENEFITS

AM Water Helps Maintain Blood Volume which maintains your energy. Proper hydration improves your concentration and reaction time, especially during exercise.

AM Water Helps Protect Against a Variety of Ailments including colds, constipation, and urinary tract infections.

AM Water has a Smaller Water Cluster making it possess a superior hydrating capability, greatly increasing nutrient delivery. It easily penetrates your body’s cells.

AM Water is Oxygenated. AM water carries more oxygen throughout your body containing 20-50% more oxygen than regular water.

AM Water has an Optimal Ph Level. Ph measures the acidity and alkalinity of water. 1.0 – 7.0 is acidic while 7.0 – 14.0 is alkaline. The optimal range of Ph in your body is from 7.2 – 7.6, slightly alkaline. All the cells that make up your body are slightly alkaline and must stay that way in order for you to be healthy and alive.

AM Water has Anti-Oxidation Power. AM water has powerful anti-oxidant properties that are reactive and neutralize highly unstable substances called free radicals that cause oxidation. Anti-oxidation is the basis for all anti-aging therapies and can greatly reduce the development of many chronic diseases.

THE SPECS

2 year warranty on all parts and labor.

30 day money back guarantee. Be sure to return the warranty card within 10 days of purchase to activate the warranty.

After 15-20 liters of water the system purges and cleans itself.

Self cleaning device to protect the device.

Voltage 110 60hz. 80 watts of power consumption. 4.5 kilograms in weight.

Works with temperature between 5-30 Celsius.

Tap water open and close system.

Works with continued electrolysis.

Maximum of 3 liters per minute.

Cleaning device polarity auto alternative system.

Platinum and titanim electrodes.

5-6 months of filter life – based on 20 litres per day.

Silver activated carbon fiber filtered calcium.

Auto shut off temperature censor.

Water supply is direct connection to the tap.

The Retail Price of the AMWater Actify is $2,899.00.

The Wholesale Price is $2,499.00.

Source by Paul H Moore

Simple Protection Tips Against COVID-19 Delta Variant

The Delta variant of COVID-19 has been spreading across the globe like wildfire. Now, It’s obvious that vaccination alone can’t protect against this variant. Therefore, we have shared some tips to help you stay safe when it comes to coronavirus. Read on to find out more.

How the Delta Variant is Different

According to statistics, the Delta variant of the virus is 300% more contagious than the first variant of the virus. Early research studies suggest that this is because of the ability of the Delta variant to replicate much faster than the previous strains.

Apart from being more contagious, the symptoms of this infection are more severe. Although vaccines may reduce the severity of the infection, you can do a few simple things in order to protect yourself against the new variant.

The Delta Variant

The size of the particles of the Delta variant is.125 microns. In simple words, one single strain of human hair is 500% thicker than one coronavirus. The good news is that you can use the right type of face masks in order to filter out even smaller particles.

We know for sure that face masks can filter tiny viruses of influenza. But we are not sure if they are effective against this variant of the virus. According to facts and figures, the particles of the Delta variant are bigger than influenza particles.

According to a study done in Brazil, wearing the right type of mask can reduce your likelihood of catching the virus by 87%. It is as effective as the vaccine against the virus. There is no doubt that vaccines can also help you survive when you are infected.

In response to the new variant of the virus, fresh masking recommendations were released by CDC. According to CDC, n95 masks are the best choice if you want the maximum protection against two different types of viruses including covid-19.

N95 masks or Surgical Masks

As far as preventing influenza infection is concerned, the surgical mask is are almost as effective as and 95 masks. Apart from this, both of these marks are capable of capturing tiny particles that are over 10 times smaller than COVID-19 particles.

Improving Ventilation

Since the concentration of the virus is relatively higher inside and closed spaces, COVID-19 spreads faster due to poor ventilation. Therefore, you may want to improve your indoor ventilation to bring the viral concentrations down. You can do this by keeping a few windows open during the day. Apart from this, you can turn your central air fan to “Always On” mode. If you follow this simple strategy, you can reduce the spread of the virus by 30%.

HEPA Filters

Air purifiers are also effective against this type of viruses. But make sure that you go for an air purifier that has HEPA filters inside.

Long story short, you can follow these protection tips if you want to stay safe against the Delta variant of COVID-19.

Source by James Yuan

Whirlpool Air Conditioners – Devices That Effectively Rid the Reasons For Sweating

An air conditioner is a device which is meant to primarily provide a low degree of temperature in order to enhance the level of comfort. This line can be termed as the most lucid description of the purpose of an air conditioner.

However, there have been many modern developments that have taken place over time and most of them have been for the better. Therefore, the level of customer satisfaction derived from the usage of these devices has also seen a remarkable level of improvement.

There have been many companies in this world that have done wonders when it comes to making fantastic air conditioners. However, only a select few have made that all too important difference between being part of the best and being part of the conventionals.

One of those companies is Whirlpool and Whirlpool air conditioners have certainly made quite an impact in the market. These devices have certainly made it big in the air conditioners market and, therefore, they have clearly turned into nothing but ‘cash cows’ for the company.

This company deals both the manufacturing of window air conditioners and split air conditioners. Some of the products that come under the category of window ACs are as follows:

1. WAWR09G20

2. WAWR12G20

3. WAWR18G10

4. WAWR18G20

While some of the products that come under the category of split air conditioners are as follows:

1. WASR12K30

2. WASR18B28D0

3. WASR12K20

4. WASR09K20

The superior product quality of Whirlpool air conditioners can be understood when one takes a look at the features that are present in any of these ACs. Hence, the following paragraphs describe the features that are present in the WAWR09G20 and the WASRI12K30.

The WAWR09G20 is an air conditioner having a capacity of 0.8 tonne and it is vested with many advanced technologies and features. One of the technological marvels that is present in this device is the 6th sense MPFI cooling system. This technology enables this particular air conditioner to operate at low power intakes while giving an enhanced level of cooling at the same time.

Another wonderful feature that is present in this air conditioner is the spectra wide heat exchanger. These exchangers, increase the surface area so as to effectively provide an enhanced level of air distribution. This leads to a remarkable degree of improvement in the cooling that is given by this device.

Another fantastic member of the impressive assortment of whirlpool air conditioners that are there in the market today is the WASR12K30.

This device is, perhaps, nothing but the best in the product sector of split air conditioners and the reason for this is its ability to provide fantastic level of cooling by virtue of technologies like :

1. 6th Sense Air flow system

2. 6th Sense Sleep

3. 6th Sense Quick Cool

4. 6th Sense MPFI Cooling system

Apart, from the technologies that have been listed in the above list, this split AC by whirlpool also has other technologies like the Anti freeze thermostat, which prevents the formation of ice at the evaporator. Ice formation in this part of the AC is quite detrimental to the health of the compressor which is the most important part of any AC.

Whirlpool certainly has taken on the act of utilisation of the platform of online shopping in India in quite an effective manner and this can be seen when one looks at the number of Whirlpool ACs that are sold nowadays. This company is certainly establishing a prominent presence in the Indian subcontinent.

Source by Shefali Roy

Things To Look Out For When Getting Landed Property

Landed property can be very enticing and today it is not as hard to find these types of properties ready for rentals and other forms of occupation. But just like any other property, you ought to make your considerations to ensure that at the end of the day you select the best landed property. Here are the key areas that you should pay attention to when looking at the landed property.

The location – The area within which the property is located is of utmost importance because it can determine things such as security and convenience amongst many other important factors. It can also determine the kind of atmosphere you enjoy, especially for residential properties. Always look out for the perfect location that meets your preferences. Also important to find out is what the neighborhood has to offer. For instance, does it have good schools, hospitals and shopping complexes or do you have to drive far off to find the services that you need?

The interiors – Are they spacious enough for your liking? The size can determine plenty of factors such as how fitting it is for you or your family and the items you own and wish to have. The larger the interiors the more convenient you will find the property to be. If the landed property you are looking at comes with appliances and fixtures, consider how functional, they are or whether you need to make any replacements and repairs. A well-maintained property should give you an easy time settling down without incurring any further costs.

The layout – The fact is that most landed properties will come with more than one unit. For this reason, the layout of the property really matters. You of course want to have a unit that offers you some sort of privacy and relaxation, even though you have neighbors. Find out how possible, such private moments are by looking at the layout of the property. Still on layout, consider things such as car parking lots designated for each unit and how convenient that is for you.

The facilities – Landed properties nowadays come with almost all the facilities you could need but there still remains a need to look at what you have available. The most common facilities include gym, swimming pools, gardens, playgrounds, hot spas and sun decks. Relate what the property has available to you to what you consider most important so you can get the best.

Other areas that you can check out when looking at the landed property include the electrical wiring, plumbing, security features and availability of essential amenities such as water. Whether you are purchasing or renting the landed property, these factors are always important to consider keeping future regrets at bay. When buying, it is advisable to keep off properties that seem like they obviously need a major face lift. Fortunately, today it is very possible to find new and well-maintained landed properties that easily put your worries to rest.

Source by Eugene Ho

Six Deadly Pool Purchasing Mistakes and How to Avoid Them

The six deadly pool purchasing mistakes are frequently made as a result of simply not being informed and knowing what questions to ask. Avoiding these mistakes could save you thousands of dollars and hours of heartache and frustration.

So you want to buy a pool but don’t know where to start? Perhaps knowing the common mistakes people make when purchasing a pool will help you start off on the right foot. Everyday, people get “duped” into buying the wrong pool, the wrong way, with no recourse or protection. These same people wind up being dissatisfied and even angry because their expectations weren’t met.

Throughout my long career in the pool industry, I have met many people who have made serious mistakes when they purchased their pool. Every year it seems as though I hear the same stories over and over. As a result of talking with scores of pool owners and through my own years of experience in the industry, I have concluded that there are six common mistakes that people make when purchasing a pool.

The Solution to Avoiding the
Six Deadly Pool Purchasing Mistakes is. . .
Ask the right questions! It’s simple. If you ask the right questions, you’ll uncover 90 percent of the potential problems that most pool purchasers commonly face. There’s always that 10 percent chance that something will happen that you couldn’t have foreseen; but, for the most part, you’ll be able to avoid almost any surprise.

However, if you’re like most other pool purchasers, you know so little about pools or pool construction that you don’t even know what questions to ask. That is why I wrote this special report just for you. After reading this report, you will be one of those few pool purchasers who “know what they’re talking about.”
The first questions you need to ask yourself when thinking about buying a pool are:

1. Why do I want a pool?
2. What will my family and I use the pool for?
3. Who is going to maintain the pool?

Why are these questions so important? Before you can decide “what” type of pool you want, you need to understand “why” you want a pool. Is it for family recreation, entertaining guests, physical therapy, exercise, personal recreation or just to “keep up with the Jones’?”

Knowing the answer to these questions will help you avoid the first deadly pool purchasing mistake, which is. . .

Mistake #1:
Not Designing Your Pool for its Intended Purpose
You might have heard the phrase, “Form follows function.” To know what type of pool you want, you need to know what you’ll be using it for. The type of pool you’ll select should depend on what you’ll be using it for.

More often than not, people considering the purchase of a pool have a specific purpose in mind. It is important to write this down and have it ready when you start to talk to pool builders.
For instance, if you are going to use your pool mostly for family entertainment, then you will want to include safety features such as gating or fencing that will control access to the pool. If your primary use is for entertainment, then you may consider mood lighting features with special landscaping features, such as waterfall features in and around the pool. If you want to build a pool for physical therapy or exercise, you might include a longer shallow area for swimming or perhaps built in spa jets in the seat, pull up bars, or even a smaller pool with swim jets.
The Myth of the Large Pool
An interesting phenomenon frequently happens when the majority of first-time pool buyers desire a large pool with a deep end and a diving board. After about a year of pool use, new owners discover that the deep end rarely gets used and the diving board becomes more of a safety hazard. Most of the games that are pla
yed by the kids are done in the shallow end and that’s where the adults spend 95 percent of their time. Because they decided to build a large pool with a deep end, only 35 percent of the pool gets utilized, resulting in unnecessary expense and low usage. It’s also important to consult with your insurance agent regarding increased premiums with diving boards.

Fencing is always an important element of your pool, not only for child safety but to provide a certain level of privacy. You may consider a retaining wall if your yard is on a slope so that you can step down to the pool, providing you more privacy. Many pool builders will try to talk you into elevating the level of your pool if your yard has a slope. Simply because there’s less dirt to remove, builders can cut trucking expenses. This can leave you with an inground pool that has an above ground look.

You should also have an understanding or vision of what you want your entire backyard to look like, not just your pool. Your pool should compliment your existing backyard and integrate with your intended landscaping goals, both now and in the future.

Here are some other points to consider when designing your pool:

1. Access – Ensure there is easy access to your pool from your house, restroom or entertainment area. You might want to consider how patios, decks or walkways are positioned to provide a safe and simple entrance and exit between your home and your pool.

2. Lines and Cables – Before settling on a location, you need to ensure that there are no electrical or telephone wires, sewer or septic lines or buried pipes.

3. Drainage – Water needs to drain away from the pool to avoid standing water or dirt and mud getting into the pool. This is especially important if you’re in a location that has a history of flooding.

4. Add-Ons – If you plan to install a diving board, spa, slide or waterfall, make sure that you plan for adequate deck space for each add-on.

5. Sheds – A common method of protecting equipment is to build an equipment shed close to the pool.

6. Sun vs Shade – The sun can help to keep your pool water warm; however, placing your pool under trees can result in a lot of extra maintenance.

7. Covenants – Find out if there are any subdivision covenants regarding the construction of pools.

To obtain a building permit, it is generally required to get a survey or plot plan of your entire property. In fact, you should already have one from when you bought your home. The survey will help you to decide where to locate your pool and any other accessories.

Make sure you schedule an initial on-site consultation so that your pools primary functions and activities are reflected in the design. Furthermore, an on-site consultation should urge you to consider the overall vision of what you want your backyard.

Mistake #2
Choosing the Wrong Pool “Container”

There are three basic types of in-ground pools: concrete/gunite, fiberglass, and vinyl liner.

No matter what type of pool you choose, you will be required to perform a certain amount of maintenance. However, each type of pool provides its own maintenance challenges. It’s important to understand these challenges by pool type before you make your selection.

Concrete/Gunite Pools
Concrete and gunite (a type of reinforced concrete) are the most common in-ground pool types because they have been on the market longer than the new, more efficient types of pools.

Concrete and gunite are sprayed over a framework of steel rods and wire mesh, then coated with plaster to give the pool a smooth, printable surface. Today, concrete and gunite pools are most commonly used for commercial and public swimming pools.

The nice thing about concrete and gunite pools is that you can virtually build them in any shape or form that you wish. Unfortunately, it is the most expensive of the three types of pools and it takes a long time to build.

Furthermore, concrete and gunite is porous, therefore providing small areas for algae and bacteria to grow. In addition, it can easily crack and chip with the change of the temperature and weather conditions, providing even more areas for algae and bacteria to grow. This is why concrete and gunite pools require the most maintenance of the three types of pools, costing $100 or more a month to maintain. It is also rough on the kids feet, and because kids will stay in the pool for extended length’s of time makes this extremely damaging to the skin.

Concrete and gunite pools require periodic annual or semi annual pool draining for cleaning purposes. When the pool is drained, the cracks in the concrete and gunite need to be repaired and the pool siding acid-washed and perhaps re plastered, if necessary. Acid washing is necessary every one to three years, depending on water condition. Acid washing does remove a layer of plaster or mar cite. Usually, after the second acid wash you can expect to re plaster the pool.

Vinyl Liner Pools
Vinyl liner pools use a high-density vinyl lining, offering a cosmetic textured pool surface. The lining is “seamed” together throughout the sides of the pool. Polymer or steel walls are bolted and fastened together on concrete flooring. The vinyl liner is spread over the floor and paneled walls and connected to the top of the walls by a vinyl rib at the outside edge of the liner.

The upfront cost of vinyl lined pools can be inexpensive when compared with concrete and gunite pools and take much less time to install. However, the maintenance on vinyl lined pools is high because the liner can be easily scratched or cut, especially if there will be toys or hard objects in the pool (even mechanical pool cleaners!). To repair a vinyl lined pool, you’ll need to replace the entire lining, which can cost from $1,500 to $3,900 or more depending on the time of the season for replacement.

Also, algae and bacteria tend to nest in the porous texture of the fabric and seams of the vinyl, requiring high amounts of chlorine to keep the pool clean. It’s kind of like a shower curtain that is exposed to moisture and heat on a consistent basis.

Severe problems can arise when algae starts to grow under a vinyl liner because it can start to eat the liner from the underside and is very difficult to treat. You can expect to pay up to $100 or more a month to maintain a vinyl liner pool.

In addition, heating costs will generally be higher, especially on steel wall construction. The only thing between the ground temperature of 57 degrees and the pool water is steel and vinyl. A polymer or plastic wall does reduce the cost of heating somewhat; but, it also adds considerable cost to the construction of the pool ($1,500 to $2,500 in some cases).

Fiberglass Pools
Fiberglass pools are made out of a seamless one-piece, pre-formed fiberglass container that is set in the ground and can be installed in less than five days. The fiberglass itself has a smooth, non-porous gel coat surface.

Although fiberglass pools have a wide range of sizes and shapes, and can be moved if you choose, you are restricted to those sizes and shapes that are offered, unlike a concrete or gunite pool. You’ll rarely find a fiberglass pool over sixteen feet in width because the come from the factory ready to install in one piece.

Fiberglass pools are appealing because they require much less maintenance than either of the other pool types. Fiberglass will not rip, tear, crack, chip or leak, providing a longer-lasting surface. Therefore, monthly maintenance costs are minimal. The durability of fiberglass is especially important if you live in a cold weather climate, or unstable soil, in which surface materials contract and expand. This is why concrete and gunite pools crack and chip.

Because a fiberglass is non-porous, algae and bacteria cannot stick to the surface. This reduces the amount of chlorine necessary to keep the pool clean to about one-fourth of the amount that other pools use, which can add up to large cost savings over time.

Fiberglass pools never require draining for cleaning, which is a huge chore. In addition, to clean the fiberglass surface, all you need to do is vacuum the bottom of the pool, which takes only 10-15 minutes a week. At first you might think that concrete/gunite pools are the most stable; however, fiberglass pools can flex about two feet without sustaining any damage and can safely withstand more external pressure than concrete/gunite pools.

However, there are huge distinctions between different fiberglass pools. (They are not all created equal.) Vinyl Ester resin is a must! This material is a bonding agent that helps hold the pool together. Vinyl Ester also prevents cobalting, which is a black or purple stain that forms from the outside in. It is a chemical reaction within the fiberglass itself. The stain can usually be removed but will continue to resurface. Make sure you see it in writing that the pool has Vinyl Ester. If it’s not advertised in print, chances are it doesn’t have it.

It’s also important to have some sort of vapor barrier in the fiberglass. Even though the gel coat or finish is smooth and non-porous, the back of the pool is without a vapor barrier. Fiberglass is a cloth that will absorb moisture from the ground. Moisture or even ground water will leach through the fiberglass causing blistering on the gel coat that is not usually covered by warranty.

You also want to make certain the pool is constructed with hand laid fiberglass as opposed to chopped glass. Hand laid fiberglass is much stronger and is built with full sheets of fiberglass cloth. Chopped glass fiberglass is a pudding-like substance with shreds of fiberglass usually sprayed or rolled on. Fortunately, because fiberglass pools are pre-built, you can see the pool prior to installation. Check out the finish beforehand. If it doesn’t look good out of the ground it won’t look good in the ground. Remember, water magnifies any flaws.

The technology in this industry is changing and evolving almost monthly, with recent introductions like the infusion of Carbon Fiber which adds extreme strength, and some pretty nice looking colors, this makes this worth a closer look than in the past.

Mistake #3
Choosing the Wrong Developer
The worst mistake that a person buying a pool can do is choose the wrong developer to build the pool. There are many “fly-by-night” pool developers that use temporary workers to install pools,. Other developers employ installers (or subcontractors) that have virtually no experience with pool installation.

Pool developers consistently experience a high turnover with their staff so it’s a constant struggle to keep good, experienced people who have installed a lot of pools. There are also a lot of developers who will sell you a pool with no regard for how it will be integrated with your landscape and lifestyle.

Make sure the developer has a firm brick and mortar location and is not working out of his garage. Also, do not purchase a pool from the Internet. Take time to visit the location.

After narrowing it down to the top two or three builders, invest in the time to visit their location to look at their products and services. See how their staff treats you. (Remember, people who feel good about themselves produce good results).

This is the biggest investment of your life next to your home. Invest your time. Take the family on a fun day out to look at pools and builders. Stop for lunch. Slow down, take your time. Feel comfortable and investigate.

The following are several questions you can ask potential pool developers when you request a proposal or bid to build your pool.

1. Do you offer the type of pool container that I want (fiberglass, concrete/gunite, vinyl liner) and how much experience do you have with installing that type of pool?
Most pool builders specialize in one of the three types of pools. A builder that is an expert in installing concrete pools may not necessarily be an expert in installing fiberglass pools. Find out how many of the same type of pools the builder has installed. If you are having accessories such as a deck, spa or landscaping done with the same builder, make sure that they have done that type of work in the past with other clients.

2. What is the average experience of your installation staff or do you subcontract out the construction? Do you hire only licensed and bonded sub-contractors?
It isn’t uncommon to find a pool builder that uses subcontractors for the entire installation process. In this case, you need to consider the experience level of the subcontractors. A pool builder is only as good as the people doing the installation work. Preferably the builder will have his own staff, resulting in better quality control. However, if a subcontractor is used, make sure that they are licensed and bonded to protect you if things go wrong.

3. Are you certified by the National Spa and Pool Institute? What other trade organizations do you belong to?
The National Spa and Pool Institute (NSPI) is the association that supports the spa and pool industry. The NSPI has a “Certified Builder”course that teaches builders how to build high-quality pools using the latest techniques that meet specifications. Having the certification means that the builder has at least met some standard education requirements to do the job right and it shows the builder’s commitment to quality. This one question can weed out a fly-by-night builder from a reputable builder. If the builder belongs to the Better Business Bureau, a Chamber of Commerce, or even a Rotary Club, it demonstrates that the builder intends to be around for a long while.

4. Do you provide financing for the pool construction project?
Even if you have the money sitting in the bank or you plan to get it from a commercial lender, asking this question may result in some revealing information. If a builder provides financing, it means that they have been around long enough to build credit and a good reputation with the banks. It is advantageous to have options for financing the construction of your pool. Another benefit of financing your pool is that in-ground pool construction is considered a home improvement and the interest payment on your loan is tax deductible.

5. Can I speak with several of your past customers?
This is the killer question. The proof is in the pudding and if you can’t speak to a previous customer, it probably means that they don’t have one or that they are disgruntled. Run from a builder that can’t provide you with testimonials from prior satisfied customers.

The real test is talking to those customers yourself. Ask the builder if you can pick one or two from a list of 10 previous customers. This will ensure that you’ll be choosing a non-biased customer. Ask the customer, “I know that the builder does great work but all jobs have at least one or two things that didn’t go as planned. Can you tell me what were some things that didn’t meet your expectations?” This question will get the customer off the fence.

6. To what extent is the owner involved in the daily operations of the business?
If the owner of the business isn’t 100 percent involved in the business, it doesn’t mean that you write them off but you should find out how the business is being managed. Quality usually has a direct correlation to the level of involvement by the owner of the business.

7. Can the builder present a certificate of insurance to prove that they are fully insured?
Ask the builder about any liability and compensation insurance he may carry to protect you in the event of an accident during the construction of the pool. There’s nothing worse than getting into a situation in which things didn’t go as planned and not having recourse for receiving compensation because of damages. Every reputable builder should be fully insured. Period.

If you ask and don’t receive a copy of worker’s compensation and liability insurance, don’t use the builder. You may even go as far as to call the agent listed to verify that their insurance is in force. Finally, remember worker’s compensation protects people. Liability protects property. You need to have both.

Other things you might consider are the builder’s credit rating and you may want to check county records for lawsuits.

8. Does the builder offer in-home design services?
Many good builders will offer in-home design services that will not only save you money but also demonstrate the builder’s experience and expertise.

9. If there is damage to my yard or landscaping, will you repair it?
It is imperative that you set your expectations up front during the interview process with the builder, especially when it comes to damage. Many pool buyers are surprised when they see the amount of damage to their yard that takes place during a pool installation.

However, there is such a thing as excess damage due to negligence on the part of the builder. Make sure you address this right up front and that it gets into your contract. Some pool builders aren’t willing to take on the risk of paying for yard damage.

10. What are the electrical and plumbing requirements and who will perform them?
Your pool builder should know about existing electrical, plumbing, zoning, building and grading requirements. It’s important to test the knowledge of your builder. Even if you don’t know the answers yourself, you’ll have an idea whether they have a good grasp on the requirements.

By the way, never allow a pool builder to force you to take a permit out in your name. It should always be in the builder’s…

11. What type of maintenance training will I receive upon completion of the pool?
Upon completion of pool installation, your pool builder should provide you with training, including: equipment maintenance training; chemical and cleaning training; winterizing training; and safety training. These topics will be crucial to the longevity of your pool.

12. How long will the construction take and when can you start?
Even if a pool builder is good and you feel comfortable with their skills and ability, their schedule needs to sync with your schedule. A good pool builder will most likely be booked, so you may want to start the search process early in the season or reset your expectations as to when the pool can be installed.

Never choose a pool or a builder based strictly on schedule. Make your choice on the quality of both the product and the builder. A high-quality builder will never sacrifice quality for speed. Remember, if you are a first time pool buyer, another couple of months won’t hurt you. Stay focused on quality.

13. What is the cost and how much do you require as a deposit?
Ultimately, your pool needs to fit your budget. You should ask for a proposal only from builders that you feel comfortable with and meet your minimum requirements. Although it varies from builder to builder, 2 percent to 5 percent down is an acceptable amount to ask as a deposit. If a builder asks for an amount greater than 10 percent down, it’s time to end the interview. Also, make sure you examine the down payment schedule and make sure the builder explains it to you.

Good References are Important

Overall, asking this series of questions will help you get a feel for who may be the best choice to build your pool. Remember, good references are important because they are based on past experience rather than a right answer to an interview question. Call local building departments, call the state, and call the Better Business Bureau. A good builder’s reputation will precede them.

Mistake #4
Not Getting a Full Understanding of Your Pool Contract and Warranty
It is certainly a deadly mistake not getting a full understanding of your pool contract and warranty. As Ross Perot once said, “The devil is in the details.” Pool contracts and warranties can be deceptive if they are not read carefully and if you don’t ask enough questions.

Parts of a pool usually included in the warranty are:

1. Structural – Structural integrity of walls, reinforcements and concrete.

2. Equipment – Equipment such as filters, skimmers, pumps and heaters.

3. Plumbing – Materials and workmanship on electrical, gas, piping and pool plumbing.

Generally speaking, most pool buyers get surprised when something goes wrong because they didn’t take the time to understand the details of what is included in the warranty and more importantly, what is NOT included in the warranty. Try to make sure your pump, filter and heater are from the same manufacturer. That way you have one warranty that covers your main equipment. Plus, most pool companies will not stock repair parts from multiple manufacturers. Things like discoloration in fiberglass and vinyl liner pools are usually not covered because the color of the walls have a lot to do with how you’ve maintained the pool and the chemical balance of the pool water. Chipped concrete or gunite are not usually warranted because that’s the nature of concrete when exposed to the elements.

When purchasing a vinyl liner pool, you need to be cautious about what’s included in the warranty for the liner. Is it just the seams or is it the entire liner? Most vinyl liner pool builders stress the warranty on the seam, but the seam never goes bad. What frequently goes bad is the vinyl lining, not the structural walls or the seam.

Who’s Warranting What?
Understand who warranties what. For instance, who warranties the pump and filter? The manufacturer or the dealer? Who do you contact to report problems? Do they have a toll-free number? Who comes out to fix the problem? In some cases, each individual manufacturer will warranty each separate piece of equipment and will have different service providers fixing the problem. There’s rarely a one-stop solution for pool warranties and service.

Read the warranty carefully with the builder and ask questions. Ask what is not warranted and why. After you’ve seen a couple of warranties side by side, the questions will become much easier.

Mistake #5
Focusing on Upfront Cost Rather than Cost of Ownership
Because in-ground pools can cost up to $40,000 and more, most pool buyers are concerned about the upfront price and pay little attention to daily operational costs. Purchasing a pool that requires little maintenance will usually be the cheapest deal in the long run. Pools that don’t require a lot of chemicals, cleaning, resurfacing or replacement parts will cost less over the life of the pool.

Additional Costs

Additional costs of required basic equipment can surprise some pool buyers. Equipment such as filter systems, steps or ladders, and skimmers for surface cleaning are considered essential.

Many pool owners install heating equipment and pool-side decking of concrete or wood. Pool covers are often used to keep water clean and retain heat when the pool is not in use. If used properly, these covers can be a wise energy-saving investment.

Mistake #6
Falling for Slimy Sales Gimmicks
Once you have decided to build a swimming pool, there is a natural excitement and eagerness to have it installed as soon as possible. This is often the point at which unwary buyers can get into hot water because dishonest salespeople and builders will be quick to take advantage of the situation.

Keep in mind that the late spring and early summer months can bring these unscrupulous people into communities where home swimming pools are popular. Attractive advertisements can turn up, offering deals that seem too good to turn down. Here are some warning signs that signal “Buyer Beware!”

1. Salespeople who tell you an advertised pool they offer “on sale” is not worth having and then try to switch you to a more expensive model. This is called “Bait and Switch” and is a tactic that is often used in the retail world.

2. Salespeople who use the ploy of offering a reduced price on the basis your pool will be used as a model.

3. Salespeople who pressure you into signing a contract. Remember: no reputable builder and no authorized representative of a reputable builder will rush you into signing any agreement or contract at any time.

4. Never get talked into taking out the “Building Permit” yourself or in your own name. The contractor should do this. Always make sure that the contract clearly states that the pool builder is required to hire only licensed and bonded “subcontractors.”

5. If the pool builder will not do an on-site initial visit, be alerted to the possibility of a hard sale. Chances are, the builder does not understand or care to understand your requirements.

Conclusion
Purchasing a pool can be a scary experience, especially for those first timers who haven’t been through the process. There are a myriad of items to consider… pool type, maintenance, warranties, contracts, liability, plumbing, landscaping, electricity, drainage, restrictions, accessories, and so on. It’s no wonder many pool buyers make mistakes that end up costing them hundreds, even thousands, of dollars.

With the information in this special report, you will be able to avoid many of the most common mistakes people make when purchasing a pool. It will equip you with the ability and know-how to ask smart questions that will result in helping you find the right pool for you and your family.

Source by Mark Naras

Karcher Professional’s – Taski Vacuum Cleaners Range

Among the Karcher vacuum cleaners and the Karcher office cleaning supplies, the Taski range of vacuum cleaners deserve a special place. Taski manufactures a range of highly efficient office cleaning products which are designed keeping in mind the latest technology and are representative of innovation in terms of performance, ergonomics and cost factor. The range of vacuum cleaners offered by Taski are the Taski swingo, Taski ergodisc, Taski Vento, Taski Vento 8 and Taski Vento 15 and these are supplied by Hygo as office cleaning products and hygiene cleaning supplies all over the world.

Karcher has introduced the Taski swingo range of machines which include the scrubber drier as well and are fine examples of operational efficiency and a user friendly interface. Being one of the Karcher products, the Taski swingo series has been designed in such way that it is not only compatible but also features an ultra-compact scrubber drier which is used in offices and homes for providing cleaning solutions and hygienic surroundings. Similarly, the Taski swingo 450B of Karcher is truly versatile nature and this is apparent from the fact that it is effective even on congested hard floors which are typical of retail stores, kitchens, hospitals and schools as well as in small areas like homes and offices. Karcher vacuum cleaners also feature the Taski ergodisc 165 which is the only single disc machine among all of Karcher office cleaning supplies and apart from being cost efficient it provides standardized cleaning at a low speed. The Taski ergodisc is particularly suitable as a part of office cleaning products and hygiene supplies since it can perform a number of cleaning functions.

Karcher also features the Taski Vento series of Karcher products and Karcher vacuum cleaners and these are available as Taski Vento 8 and Taski Vento 15. The Taski Vento 8 is one of the Karcher vacuum cleaners which use an extremely efficient filtration system consisting of a disposable fleece bag, filter cloth, motor protection filter and an optional exhaust filter as a result there is a significant improvement in the air quality after its use. Similarly, the Taski Vento 15 vacuum cleaner of Karcher has been equipped with a 15 liter dust bag and is a hallmark of improvement as a part of office cleaning products and hygiene supplies because it features a new handle design as well as a castor system for easy maneuverability. The innovative aspect of Karcher office cleaning supplies is apparent from the fact that all the machines can be easily stored and are user friendly in nature.

Source by Neej Amb

Concrete – What to Do About Dusting, Crumbling, Cracks and Discolouration

Concrete is one of the most common materials used in modern construction; the reason for this is that there is no other material that can provide the same results as concrete. The use of concrete for construction provides some great advantages, such as ease of use and strength. When concrete is in it’s liquid form it is very easy to use, but when it dries it provides incredible strength that will last for years. Despite the fact that concrete is a great source of construction material for everything from concrete floors, to building foundations, bridges and tunnels, there could be some problems with the concrete over time. Some issues that may arise include the overall strength of the concrete itself, as well as corrosion due to the concrete being exposed to excessive moisture; in addition, the surrounding soil composition could also cause some problems. Not only could low quality materials and improperly mixed concrete be costly later, but it can also be dangerous if the result diminishes the concrete’s strength. To avoid these problems it is advisable to always use high quality concrete and to stay vigilant for possible problems with the concrete.Some of the most common concrete problems include,

  • Dusting: The surface of the concrete will form a loose powder, which indicates that the surface of the concrete is disintegrating. This can be caused by water bleeding into the concrete during finishing. This may cause the concrete to have a high water ratio, leading to a weakened surface. Additional causes of this concrete problem may include using heaters during a cold weather operation without adequate ventilation, which may cause excessive carbon dioxide, leading to carbonization, or allowing the surface of the concrete to freeze.

  • Flaking & Peeling: The freezing and thawing process of finished concrete often causes flaking and peeling; some of the factors that may contribute to this problem include, not using air-entrained concrete, which is a must to protect the concrete from the affects of freezing and thawing. In addition, if there was too much calcium chloride used as an accelerator, this may also cause a problem with peeling and flaking. Some other situations that may cause concrete to flake and peel include working the surface of the concrete too much, insufficient curing, water bleed, or using deicer.

  • Fine Cracks in the Surface of the Concrete: In some cases the surface layer of concrete may begin to form a network of fine cracks. This problem is often caused when a rapid drying procedure was used, or there was inadequate curing of the concrete. Other contributing factors may include water on the surface during finishing, or the sprinkling of cement on the surface in order to dry the water bleed.

  • Cracking: The most common reason that concrete cracks is due to the expansion and contraction of the concrete without s sufficient means of relieving stress. This could be the result of improper jointing, shrinkage, and settlement. Other contributors to this problem include freezing and thawing, or external restraint, such as flooring.

  • Shrinkage: Another common problem with concrete is cracking due to shrinkage. This may occur when there is a rapid evaporation of the surface before the concrete has set.

  • Reduced Strength of Concrete: This can happen when improper casting, handling and curing procedures are used; additional causes may include high air content, too much water, or an error in the manufacturing of the concrete.

  • Delamination: This is a situation where there is a separation between the top slab and bottom slab that may be caused by a thin layer of water or air. Some situations that may lead to this problem include when air entrained concrete is used for hard finishes, sealing the surface while there is still bleed water present, overworking the surface, or using a polyethylene vapor barrier.

  • Discoloration: Some of the most common causes of concrete discoloration include using calcium chloride to speed set times, changes in the mix proportions or material sources, uneven curing.

  • Curling: When curling occurs, essentially what happens is that there is a distortion of the flat surface into a curved shape. This is frequently the result of a difference in the temperature of the moisture content between the top and bottom of the slab.

  • Uneven or Spotty Setting of Concrete: The most common cause of this problem is not mixing the concrete thoroughly, and the use of some superplasticizers with normal setting or retarding admixtures.

Many of these common concrete problems can be avoided when the proper procedures and materials are used during construction. Concrete admixtures can help to ensure a perfect concrete finish, if they are used correctly. This is why you should always purchase your products from an experienced construction chemicals supplier. Concrete sealant is an important aspect of preserving a concrete finish. These sealants are designed to inhibit liquids from being absorbed by concrete. In addition, this will also help protect the concrete from water erosion or freezing, as well as from substances such as salts and acids. Making mistakes when laying concrete can be very costly; to avoid the added expense of having to repair the concrete at a later time, you should always ensure that you use the best concrete products available, and that you follow the proper procedure for laying concrete.

Source by Sam D Goddard

Outside Cold Air Blowing in Behind Glove Box – Ford Explorer Or Jeep Grand Cherokee

Change of seasons sometimes reveals problems with a vehicle that would otherwise go unnoticed. If you have a Jeep Grand Cherokee or a Ford Explorer that has an outside air leak behind the glove box, then you may have a broken fresh air door (AKA Recirculate Door or Max Door). The fresh air door is used to either recirculate air in the passenger compartment or allow fresh air to enter the HVAC (Heating Ventilation & Air Conditioning) system. Surprisingly the Explorer and the Grand Cherokee share a common flaw in the heating and AC system. The fresh air doors are weak plastic that many times under the stress of the control actuator can break. When it’s cold outside this problem makes itself very apparent. In hotter climates in the summertime, a broken fresh air door drastically reduces the air conditioning’s efficiency.

Checking it is easy by operating the fresh air door and listening for increased airflow. When the climate control setting is moved to max, the sound of the air blowing through the vents should be louder because the fresh air door is sealing off the outside air, forcing the inside air to recirculate. If the sound is not louder, you can open the glove box door and look behind it for the operation of the door when switching the setting from normal to max. If the door is not visibly moving, it is likely that it has broken. The door sometimes can even fall to the bottom of the case, positioned right above the blower. It may not be in sight, sometimes you can stick your fingers through the plastic grate and feel the door laying loose on the bottom.

Replacement of the door is not a do it yourself job. The dash needs to be swung out and the HVAC case removed on Grand Cherokees. On Ford Explorers the job can be done without the removal of the case, but the assembly must be replaced. Obviously if the case needs to be removed, the refrigerant must be recovered, which requires an ac machine. So if you are mechanically inclined the one that may be done at home might be the Explorer, of course this depends on your mechanical ability. Even if you are not going to do this job yourself, this information can be used to help explain to the repair shop what the problem is. By providing more information to lead the technician to the problem area, diagnosis time can be reduced.

Source by Dennis Bandy

Importance of Wearing Hand Gloves:It’s More Important Than You Think

The accompanying is a rundown of gloves and their fitting application, as per the National Safety Council:

Cotton and texture gloves:

These can keep hands clean and ensure against scraped areas, however may not be sufficiently solid to deal with work with harsh or sharp materials.

Covered texture gloves:

This kind of glove can give insurance against some direct thought synthetic concoctions. They can be utilized as a part of lab work gave they are sufficiently solid to secure against the particular substance being dealt with.

Elastic, plastic or engineered gloves:

These sorts of glove can be utilized when cleaning or working with oils, solvents and different synthetic substances.

Calfskin gloves:

These ought to be utilized when welding, as the cowhide can oppose starts and direct warmth. The danger of cuts and scraped spots likewise can be limited by wearing cowhide gloves.

Aluminized gloves:

These gloves are prescribed for welding, heater and foundry work, as they give intelligent and protecting insurance.

Kevlar gloves:

These have a wide assortment of modern applications. They are cut-and scraped spot safe and give security against both warmth and cool.

Synthetic/fluid safe gloves:

Several kinds of gloves help secure against particular synthetic compounds:

Butyl elastic gloves: nitric corrosive, sulfuric corrosive, hydrochloric corrosive and peroxide

Common latex/elastic gloves: water arrangements or acids, soluble bases, salts, and ketones

Neoprene gloves: water powered liquids, gas, alcohols and natural acids

Nitrile elastic gloves: chlorinated solvents

To know more click here

The Importance of Gloves for Safety on Job Sites

When chipping away at a mechanical site, wearing security gloves is a best need. Comprehension of the significance of wearing work gloves at work and finding a couple that is ideal for the main job is imperative in lessening damage. The following are some key components to consider when buying a couple of work gloves.

Risk The initial phase in finding the correct work gloves is to recognize the requirement for hand insurance. Consider the business and setting in which you will work to decide the dangers you might be up against. Assessing what could cause you hurt (or what you could cause hurt) will at last figure out what sort of glove you’ll have to get the most insurance. For example, you may need to wear gloves to shield yourself from unsafe synthetic substances. On the other hand you may need to wear calfskin gloves to shield the item your taking care of from the normal oils on your skin. Different perils normal employment site risks incorporate cuts or rub, infections or microscopic organisms, extraordinary temperatures, or electrical streams. Comprehend the business and item you’ll be working with before putting resources into work gloves.

Fit and Agility – Another vital part while picking an appropriate work glove is the fit. On the off chance that a glove is too vast for a specialists hand, the glove could make a hindrance and keep work from completing securely. Then again, if a glove is too little, this could confine a specialist’s scope of movement, again preventing work from completing. Inadequately fitting gloves can make the hand spasm or rankle, eventually disabling a laborer from doing their activity securely. It is essential to quantify turns with a specific end goal to discover legitimately measured gloves.

Covering – Depending on the business, a specialist may require gloves with defensive coatings to keep harm from specific components. For instance, on the off chance that you are working with cruel synthetics, you will require gloves with an impermeable defensive covering. Different choices of security gloves incorporate ones made with an extraordinary hard support to keep cut from things like needles or cutting devices. Some exploration ought to be done before you purchase to guarantee you are shielding yourself from potential perils your activity will posture.

Perceiving the way that you have to wear gloves and painstakingly evaluating every one of the variables that you should be shielded from will help decide the glove that is ideal for you. For the greater part of your work glove needs, contact the experts at Stone Breaker.

To know more click here

Source by Md Rony